Casio Fishing Timer Ana Digital

Casio Fishing Timer Ana Digital manual

(1)
  • Operation Guide 5056
    1
    MO0905-EA
    Warning!
    The measurement functions built into this watch are not intended for use in taking
    measurements that require professional or industrial precision. Values produced
    by this watch should be considered as reasonably accurate representations only.
    When fishing, always take proper precautions to ensure your own personal safety
    and the personal safety of others around you.
    The fishing level indicator and moon phase indicator produced by this watch are
    all based on calculations that use the watch’s current time, date, and Home Site
    settings. Because of this, you should make sure that the current date and time,
    and your Home Site data are all correct before using the indicators.
    Getting Acquainted
    Congratulations upon your selection of this CASIO watch. To get the most out of your
    purchase, be sure to read this manual carefully.
    Warning!
    See the “Timekeeping” section of this manual for information about setting the
    current time and date, and about specifying your Home Site.
    Note that the fishing level indicator and moon phase indicator are all based on
    calculated values. They are provided only for reference purposes.
    Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage
    or loss suffered by you or any third party arising through the use of this product or
    its malfunction.
    About This Manual
    Button operations are indicated using the letters shown
    in the illustration.
    For the sake of simplicity, the sample displays in this
    manual do not show the analog hands of the watch.
    Each section of this manual provides you with the
    information you need to perform operations in each
    mode. Further details and technical information can be
    found in the “Reference” section.
    (Light)
    General Guide
    Press C to change from mode to mode.
    In any mode (except when a setting screen is on the display), press B to illuminate
    the display.
    Temperature Data
    Recall Mode
    Stopwatch Mode
    World Time Mode
    Fishing Mode
    Countdown Timer
    Mode
    Alarm Mode
    Press C.
    Hand Setting Mode
    Timekeeping Mode
    Timekeeping
    Use the Timekeeping Mode to set and view the current time and date.
    This watch features separate digital and analog timekeeping. The procedures for
    setting the digital time and analog time are different.
    In the Timekeeping Mode, press A to toggle between the thermometer screen and
    the temperature tendency screen.
    The fishing level indicator indicates the times when fish can be expected to be feeding.
    For more information, see
    Fishing Mode
    ”.
    Temperature Tendency
    Screen
    Temperature
    tendency
    graph
    Day of
    week –
    Day
    PM
    indicator
    Hour : Minutes
    Moon phase
    indicator
    Fishing level
    indicator
    Press A.
    Thermometer Screen
    Temperature
    Seconds
    The Moon phase indicator shows the current Moon phase in accordance with the
    current date as kept in the Timekeeping Mode.
    See “Thermometer” for details about the thermometer screen and temperature
    tendency graph.
    Important!
    Be sure to configure the current time and date, and your Home Site data (data for
    the site where you use the watch) correctly before using the functions of this watch.
    See “Home Site Data” for more information.
    Setting the Digital Time and Date
    This watch is preset with UTC differential values that represent each time zone around
    the globe. Before setting the digital time, be sure to first set the UTC differential for
    your Home Site, which is the location where you normally will be using the watch.
    Note that World Time Mode times are all displayed based on the time and date
    settings you configure in the Timekeeping Mode.
    To set the digital time and date
    1. In the Timekeeping Mode, hold down A until the
    seconds start to flash, which indicates the setting
    screen.
    Be sure to configure the correct UTC differential for
    your Home Site before configuring any other
    Timekeeping Mode settings.
    See the “City Code List” for information about the UTC
    differential settings that are supported.
    2. Press C to move the flashing in the sequence shown
    below to select the setting you want.
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    Seconds
    Hour
    UTC
    Differential
    Minutes
    Year
    DST
    Day
    Month
    Seconds
    Temperature
    Unit
    12/24-Hour
    Format
    Temperature Sensor
    Calibration
    3. When the setting you want to change is flashing, use D and B to change it as
    described below.
    Screen:
    To do this:
    Reset the seconds to 00
    Toggle between Daylight Saving
    Time (ON) and Standard Time (OF)
    Specify the UTC differential
    Change the hour or minutes
    Toggle between 12-hour (12H) and
    24-hour (24H) timekeeping
    Do this:
    Press D.
    Press D.
    Use D (+) and B (–).
    Use D (+) and B (–).
    Press D.
    Use D (+) and B (–).
    Change the year, month, or day
    The UTC differential setting range is –12.0 to +14.0 in 0.5-hour units for Standard
    Time (DST turned off), and –11.0 to +15.0 in 0.5-hour units for summer time (DST
    turned on).
    For information about settings other than the time and date, see the following.
    Temperature Sensor Calibration: Thermometer
    Temperature Unit: To specify the temperature display unit
    4. Press A twice to exit the setting screen.
    The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
    applied in all modes.
    The day of the week is displayed automatically in accordance with the date (year,
    month, and day) settings.
    See “Daylight Saving Time (DST) Setting” below for details about the DST setting.
    Any time the seconds setting is changed, the analog hands are adjusted accordingly.
    Daylight Saving Time (DST) Setting
    Daylight Saving Time (summer time) advances the time setting by one hour from
    Standard Time. Remember that not all countries or even local areas use Daylight
    Saving Time.
    To toggle the Timekeeping Mode digital time between DST and Standard Time
    1. In the Timekeeping Mode, hold down A until the
    seconds start to flash, which indicates the setting
    screen.
    2. Press C once and the DST setting screen appears.
    3. Press D to toggle between Daylight Saving Time (
    ON
    displayed) and Standard Time (OF displayed).
    4. Press A twice to exit the setting screen.
    The DST indicator appears on the Timekeeping, Fishing,
    Alarm, and Hand Setting Mode screens to indicate that
    Daylight Saving Time is turned on. In the case of the
    Fishing Mode, the DST indicator appears on the fishing
    level screen only.
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    DST indicator
    On/Off status
    Home Site Data
    Moon phase, the fishing level indicator, and Fishing Mode data will not be displayed
    properly unless Home Site data (UTC differential and longitude) is configured
    correctly.
    The UTC differential is a value that indicates the time difference between a
    reference point in Greenwich, England and the time zone where a city is located.
    The letters UTC is the abbreviation for Coordinated Universal Time, which is the
    world-wide scientific standard of timekeeping. It is based upon carefully maintained
    atomic (cesium) clocks that keep time accurately to within microseconds. Leap
    seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s
    rotation.
Casio Fishing Timer Ana Digital

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre Casio Fishing Timer Ana Digital o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Casio Fishing Timer Ana Digital responder adecuadamente a su pregunta.

Vea el manual de Casio Fishing Timer Ana Digital aquí, de forma gratuita. Este manual pertenece a la categoría Relojes deportivos y ha sido calificado por 1 personas con un promedio de 7.5. Este manual está disponible en los siguientes idiomas: Inglés. ¿Tiene alguna pregunta sobre Casio Fishing Timer Ana Digital o necesita ayuda? Haz tu pregunta aquí

Especificaciones de Casio Fishing Timer Ana Digital

General
Marca Casio
Modelo Fishing Timer Ana Digital
Producto Reloj deportivo
EAN 79767419172
Idioma Inglés
Tipo de archivo PDF
Detalles técnicos
A prueba de agua
Cronómetro Cuenta regresiva
Humedad: resistente al agua hasta 200m
Modo reloj 12h/24h
Cronómetro
Función de hora mundial
Termómetro
Calendario
Otras características
Color del producto Negro
Diseño
Material de la banda Resina
Control de energía
Tipo de batería SR927W

Preguntas frecuentes

A continuación, encontrarás las preguntas más frecuentes sobre el Casio Fishing Timer Ana Digital .

¿Tu pregunta no está en la lista? Haz tu pregunta aquí

ManualPDF.es

¿Busca un manual? ManualPDF.es asegura que encontrará el manual que está buscando en un abrir y cerrar de ojos. Nuestra base de datos contiene más de 1 millón de manuales en PDF de más de 10.000 marcas. Cada día añadimos los últimos manuales para que siempre encuentres el producto que buscas. Es muy sencillo: simplemente escriba el nombre de la marca y el tipo de producto en la barra de búsqueda y podrá ver instantáneamente el manual de su elección en línea de forma gratuita.

ManualPDF.es

© Copyright 2020 ManualPDF.es. Todos los derechos reservados.

Utilizamos cookies para asegurar que damos la mejor experiencia al usuario en nuestro sitio web. Si continúa utilizando este sitio asumiremos que está de acuerdo.

Leer más