Casio Twin Sensor SGW100-1V

Casio Twin Sensor SGW100-1V manual

(2)
  • Operation Guide 3157
    1
    MO1105-EC
    Getting Acquainted
    Congratulations upon your selection of this CASIO watch. To get the most out of your
    purchase, be sure to read this manual carefully.
    Applications
    The built-in sensors of this watch measure direction and temperature. Measured
    values are then shown on the display. Such features make this watch useful when
    hiking, mountain climbing, or when engaging in other such outdoor activities.
    Warning!
    The measurement functions built into this watch are not intended for use in taking
    measurements that require professional or industrial precision. Values produced
    by this watch should be considered as reasonably accurate representations only.
    When engaging in mountain climbing or other activities in which losing your way
    can create a dangerous or life-threatening situation, always be sure to use a
    second compass to confirm direction readings.
    Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any
    damage or loss suffered by you or any third party arising through the use of this
    product or its malfunction.
    About This Manual
    Depending on the model of your watch, display text
    appears either as dark figures on a light background or
    light figures on a dark background. All sample displays
    in this manual are shown using dark figures on a light
    background.
    Button operations are indicated using the letters shown
    in the illustration.
    Each section of this manual provides you with the
    information you need to perform operations in each
    mode. Further details and technical information can be
    found in the “Reference” section.
    (Light)
    (Light)
    General Guide
    The illustration below shows which buttons you need to press to navigate between
    modes.
    In any mode (except when a setting screen is on the display), press B to illuminate
    the display.
    You can enter the Digital Compass/Thermometer Mode from the Timekeeping Mode
    by pressing D. To enter from another mode, first use C to enter the Timekeeping
    Mode, and then press D.
    Stopwatch Mode
    World Time Mode
    Countdown Timer
    Mode
    Alarm Mode
    Press C.
    Timekeeping Mode
    Digital Compass/
    Thermometer Mode
    Press D.
    Press C.
    Timekeeping
    Use the Timekeeping Mode to set and view the current
    time and date.
    Read This Before You Set the Time and Date!
    This watch is preset with a number of city codes, each of
    which represents the time zone where that city is located.
    When setting the time, it is important that you first select
    the correct city code for your Home City (the city where
    you normally use the watch). If your location is not
    included in the preset city codes, select the preset city
    code that is in the same time zone as your location.
    Note that all of the times for the World Time Mode city
    codes are displayed in accordance with the time and
    date settings you configure in the Timekeeping Mode.
    Day of week
    Month – Day
    Hour : Minutes
    Seconds
    To set the time and date
    1. In the Timekeeping Mode, hold down A until the city code starts to flash, which
    indicates the setting screen.
    2. Use D and B to select the city code you want.
    Make sure you select your Home City code before changing any other setting.
    For full information on city codes, see the “City Code Table”.
    3. Press C to move the flashing in the sequence shown below to select the other
    settings.
    Second
    Hour
    12/24-Hour
    Format
    Minute
    Year
    Month
    Day
    Temperature
    Unit
    City Code
    DST
    The following steps explain how to configure timekeeping settings only.
    4. When the timekeeping setting you want to change is flashing, use D and/or B to
    change it as described below.
    To do this:
    Change the city code
    Toggle between Daylight Saving Time
    (
    ) and Standard Time ( ).
    Toggle between 12-hour (
    12H
    ) and
    24-hour (
    24H
    ) timekeeping.
    Reset the seconds to
    00
    Change the hour or minute
    Do this:
    Use D (east) and B
    (west).
    Press D.
    Press D.
    Press D.
    Use D (+) and B (–).
    Screen
    5. Press A to exit the setting screen.
    For details about configuring temperature display settings, see “To specify the
    temperature display unit”.
    See “Daylight Saving Time (DST) Setting” below for details about the DST setting.
    Use D (+) and B (–).Change the year
    Change the month or day
    Daylight Saving Time (DST) Setting
    Daylight Saving Time (summer time) advances the time setting by one hour from
    Standard Time. Remember that not all countries or even local areas use Daylight
    Saving Time.
    To toggle the Timekeeping Mode time between DST and Standard Time
    1. In the Timekeeping Mode, hold down A until the city
    code starts to flash, which indicates the setting screen.
    2. Press C once and the DST setting screen appears.
    3. Press D to toggle between Daylight Saving Time (
    ON
    displayed) and Standard Time (OFF displayed).
    4. Press A to exit the setting screen.
    The DST indicator appears to indicate that Daylight
    Saving Time is turned on.
    DST indicator
    On/Off status
    Digital Compass/Thermometer
    You can take direction readings and temperature readings in the Digital Compass/
    Thermometer Mode.
    Direction readings are taken by the watch’s built-in magnetic bearing sensor and
    displayed as one of 16 directions. A temperature sensor is used for temperature
    readings.
    See “Digital Compass” for more information about the digital compass.
    See “Thermometer” for more information about the thermometer.
    To enter and exit the Digital Compass/Thermometer Mode
    1. While in the Timekeeping Mode, press D to enter the
    Digital Compass/Thermometer Mode.
    The watch will start to take direction and temperature
    readings. After about two seconds, the direction that
    the 12 o’clock position of the watch is facing will be
    indicated and the current temperature reading will
    appear on the display.
    Direction readings will be taken each second for about
    10 seconds, and then stop automatically.
    Temperature readings will be taken every two
    seconds for about 10 seconds, and then stop
    automatically.
    To perform direction and temperature readings for
    another 10 seconds, press D again.
    2. Press C to return to the Timekeeping Mode.
    For information about using the digital compass, see “To
    take a direction reading”.
    For information about using the thermometer, see “To
    take a temperature reading”.
    12 o’clock position
    Current time
    During readings
    About two
    seconds
    Thermometer
    The watch takes temperature readings automatically whenever you enter the Digital
    Compass/Thermometer Mode. In addition, you can take readings manually by
    performing the procedure below.
    You can calibrate the temperature sensor if you think readings are wrong for some
    reason.
    You can select either Celsius (°C) or Fahrenheit (°F) as the temperature unit.
Casio Twin Sensor SGW100-1V

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre Casio Twin Sensor SGW100-1V o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Casio Twin Sensor SGW100-1V responder adecuadamente a su pregunta.

Vea el manual de Casio Twin Sensor SGW100-1V aquí, de forma gratuita. Este manual pertenece a la categoría Relojes deportivos y ha sido calificado por 2 personas con un promedio de 6.4. Este manual está disponible en los siguientes idiomas: Inglés. ¿Tiene alguna pregunta sobre Casio Twin Sensor SGW100-1V o necesita ayuda? Haz tu pregunta aquí

Especificaciones de Casio Twin Sensor SGW100-1V

General
Marca Casio
Modelo Twin Sensor SGW100-1V
Producto Reloj deportivo
EAN 370309020765, 79767898441, 797678984410
Idioma Inglés
Tipo de archivo PDF
Detalles técnicos
A prueba de agua
Calendario
Modo reloj 12h/24h
Cronómetro
Precisión +/- 20
Función de hora mundial
Termómetro
Humedad: resistente al agua hasta 200m
Cronómetro 1min - 24h
Brújula electrónica
Tipo de esfera de reloj Esfera LCD
Otras características
Dimensiones (Ancho x Profundidad x Altura) 51.5 x 47.6 x 13.2mm
Color del producto Negro
Peso y dimensiones
Peso 55g
Diseño
Material de la banda Resina
Control de energía
Tipo de batería CR2025

Preguntas frecuentes

A continuación, encontrarás las preguntas más frecuentes sobre el Casio Twin Sensor SGW100-1V .

¿Tu pregunta no está en la lista? Haz tu pregunta aquí

ManualPDF.es

¿Busca un manual? ManualPDF.es asegura que encontrará el manual que está buscando en un abrir y cerrar de ojos. Nuestra base de datos contiene más de 1 millón de manuales en PDF de más de 10.000 marcas. Cada día añadimos los últimos manuales para que siempre encuentres el producto que buscas. Es muy sencillo: simplemente escriba el nombre de la marca y el tipo de producto en la barra de búsqueda y podrá ver instantáneamente el manual de su elección en línea de forma gratuita.

ManualPDF.es

© Copyright 2020 ManualPDF.es. Todos los derechos reservados.

Utilizamos cookies para asegurar que damos la mejor experiencia al usuario en nuestro sitio web. Si continúa utilizando este sitio asumiremos que está de acuerdo.

Leer más