Chief RPA124

Chief RPA124 manual

(1)
  • INSTALLATION INSTRUCTIONS
    Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes
    no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use
    of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
    implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
    Chief Manufacturing, a products division of Milestone AV Technologies
    8401 Eagle Creek Parkway, Savage, MN 55378
    • P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
    8802-000195 Rev01
    ©2009 Milestone AV Technologies,
    a Duchossois Group Company
    05/09
    SSB-124, SSM-124, SLB-124 and SLM-124 Interface Brackets
    SSB-124, SSM-124, SLB-124 and SLM-124 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific
    installation instructions provided with the mount for additional installation information.
    Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.
    WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND
    DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!
    Installation Instructions
    WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND
    DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface bracket.
    NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.
    1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.
    2. Turn projector upside down on a flat surface.
    3. Place 1/2" spacers over threaded inserts in bottom of projector.
    4. Place interface bracket onto projector bottom and align mounting holes in bracket with the threaded inserts in projector.
    5. Using M4 x 20mm Phillips flat head screw and M4 x 20mm Phillips pan head screws with flat washers, secure interface bracket to projector
    and tighten all fasteners at this time.
    NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation
    instructions in the All-Points Security Kit.
    Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
    (1) Interface Bracket (1) Screw, Phillips Flat Head, Machine, M4 x 20mm ****
    (4) 10-24 Thumb Nuts ** (2) Washer, Flat, M4
    (1) All-Points Security Kit (2) Screw, Phillips Pan Head, Machine, M4 x 20mm ****
    (3) 1/2" x .194" x 1/2" Round Spacer ****
    **Only used when installing SLB/SSB interface brackets. ****Used when mounting surface of projector is recessed.
    NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the
    encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style
    interface bracket installation.
    SLB-124 SLM-124
    Towards front of
    projector
    Towards front of
    projector
    (No
    te: S
    SM-sty
    le inte
    rface
    brack
    et con
    nectio
    n
    s
    a
    r
    e
    e
    n
    c
    i
    r
    c
    l
    e
    d
    )
    (
    N
    ote: S
    SB-s
    tyle int
    erface
    brack
    et con
    nectio
    ns
    r
    e
    n
    c
    i
    r
    c
    l
    e
    d
    )
Chief RPA124

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre Chief RPA124 o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Chief RPA124 responder adecuadamente a su pregunta.

Vea el manual de Chief RPA124 aquí, de forma gratuita. Este manual pertenece a la categoría Soportes de pantalla plana y ha sido calificado por 1 personas con un promedio de 7.1. Este manual está disponible en los siguientes idiomas: Inglés. ¿Tiene alguna pregunta sobre Chief RPA124 o necesita ayuda? Haz tu pregunta aquí

Especificaciones de Chief RPA124

General
Marca Chief
Modelo RPA124
Producto Soporte de pantalla plana
EAN 841872051727
Idioma Inglés
Tipo de archivo PDF
Desempeño
Tipo de montaje ceiling
Capacidad máxima de peso 22.7kg
Color del producto Negro

ManualPDF.es

¿Busca un manual? ManualPDF.es asegura que encontrará el manual que está buscando en un abrir y cerrar de ojos. Nuestra base de datos contiene más de 1 millón de manuales en PDF de más de 10.000 marcas. Cada día añadimos los últimos manuales para que siempre encuentres el producto que buscas. Es muy sencillo: simplemente escriba el nombre de la marca y el tipo de producto en la barra de búsqueda y podrá ver instantáneamente el manual de su elección en línea de forma gratuita.

ManualPDF.es

© Copyright 2020 ManualPDF.es. Todos los derechos reservados.

Utilizamos cookies para asegurar que damos la mejor experiencia al usuario en nuestro sitio web. Si continúa utilizando este sitio asumiremos que está de acuerdo.

Leer más