1. Never store the battery in a depleted state as the cells can be damaged.
2. Discharge & charge the battery at least once every 3 months to maintain its capacity.
3. Keep the Headwear away from corrosive materials, harsh chemicals, fire and heaters.
4. The Headwear meets IP55 for basic rain/snow/sweat proof. Do not soak electronics!
Maintenance:
1. Put the Bluetooth Beanie in Pair mode by pressing Power for about 5 seconds.
The Indicator LED will be blinking Blue & Red alternately and the Headwear will search for a new Host.
2. Turn on Bluetooth on your Smartphone / Host and search for new Bluetooth devices.
For iPhone/iPad: Go to Settings > General > Bluetooth (when enabled it will start searching)
3. Choose the bluetooth beanie when it appears on your search list on your host device.
Please enter 0000 if a password is required on some devices.
4. When successfully connected the LED will slowly blink Blue, and you are ready to play!
The pairing process is required only the first time. Once paired, the Headwear will Auto Connect when available.
5. Press for about 3 seconds to turn the Headwear on / off for daily use with paired devices.
Both Sound and LED light will indicate when the Headwear is beeing powered on or off.
Blue & Red blinking: Searching for a new Bluetooth Host
Blue blinking: On and Paired with a Bluetooth Host
Red blinking: Low battery (please start recharging)
Red light: Charging battery (will turn off when recharged)
Indicator LED
When low battery, the LED will start to blink Red and you will get a sound notice.
Connect the Micro-USB cable to the USB Port and a suited USB Power Source.
The LED will light Red when charging, and turn off when fully charged.
A full charge takes ~2 hours and provides up to 6 hours playback / 60 hours standby.
NOTICE: Fully charge the battery for first time use (until LED indicator turns off)
Charging the Battery:
1. Long press Volume & Volume buttons to adjust the volume.
2. Shortly press Previous & Next buttons to skip track (if supported in host/app)
3. Press Play/Pause to pause and/or resume music (if supported in host/app)
Using Your Bluetooth Headwear:
1. Press the button once to answer an incomming call or to hang up.
2. Press the button fast twice to redial the last called number in the phone call log.
Using Your Hands-free Speakerphone:
PC
USB 5V 1A
AC Adapter
Charge from:
USB
PowerBank
Good to know:
Included:
Chill
Bluetooth
Headwear
Micro-USB
Charging Cable
User Manual
It takes up to 20 hours of
music playback for the
speakers to break-in for its
full sound potential.
The control panel should be
on your left ear side.
You can gentle adjust the
speaker position to fit you
Experiment with a Equalizer
(EQ) for your preferred sound.
Always take out the
electronics before washing
Enjoy your favorite music,
stay warm and just Chill
Chill
Vol+ / Next
Micro-USB charging
Microphone
Indicator LED
Vol- / Previous
Power On / Off
Play / Pause
Answer / Hang-Up / Redial
+
-
-
+
-
+
1. Gentle ease out the control panel and speaker from their pockets inside the dual layers.
2. Depending on the design, your Headwear might have an opening / zipper in the rear.
3. Delicate hand wash the Beanie (without electronics) cold & air dry flat. Do NOT wring hard or tumble dry!
Washing & removal of electronics:
Control Panel
Chill Bluetooth Headwear
D E N M A R K
RoHS
cCUH
Whatsapp
Mail
Facebook
¿Necesita ayuda?
Número de preguntas: 0
¿Tiene alguna pregunta sobre Chill Innovation BB-01B o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Chill Innovation BB-01B responder adecuadamente a su pregunta.
Acerca de Chill Innovation BB-01B
Vea el manual de Chill Innovation BB-01B aquí, de forma gratuita. Este manual pertenece a la categoría Cascos auriculares y ha sido calificado por 1 personas con un promedio de 7.8. Este manual está disponible en los siguientes idiomas: Engels, Deens. ¿Tiene alguna pregunta sobre Chill Innovation BB-01B o necesita ayuda? Haz tu pregunta aquí
Utilizamos cookies para asegurar que damos la mejor experiencia al usuario en nuestro sitio web. Si continúa utilizando este sitio asumiremos que está de acuerdo.
FeaturesHow to connect your Bluetooth Devices:Englishwww.chill-innovation.comPOWER TO THE PEOPLE1. Never store the battery in a depleted state as the cells can be damaged.2. Discharge & charge the battery at least once every 3 months to maintain its capacity.3. Keep the Headwear away from corrosive materials, harsh chemicals, fire and heaters.4. The Headwear meets IP55 for basic rain/snow/sweat proof. Do not soak electronics!Maintenance:1. Put the Bluetooth Beanie in Pair mode by pressing Power for about 5 seconds.The Indicator LED will be blinking Blue & Red alternately and the Headwear will search for a new Host.2. Turn on Bluetooth on your Smartphone / Host and search for new Bluetooth devices.For iPhone/iPad: Go to Settings > General > Bluetooth (when enabled it will start searching)3. Choose the bluetooth beanie when it appears on your search list on your host device.Please enter 0000 if a password is required on some devices.4. When successfully connected the LED will slowly blink Blue, and you are ready to play!The pairing process is required only the first time. Once paired, the Headwear will Auto Connect when available.5. Press for about 3 seconds to turn the Headwear on / off for daily use with paired devices.Both Sound and LED light will indicate when the Headwear is beeing powered on or off.Blue & Red blinking: Searching for a new Bluetooth HostBlue blinking: On and Paired with a Bluetooth HostRed blinking: Low battery (please start recharging)Red light: Charging battery (will turn off when recharged)Indicator LEDWhen low battery, the LED will start to blink Red and you will get a sound notice.Connect the Micro-USB cable to the USB Port and a suited USB Power Source.The LED will light Red when charging, and turn off when fully charged.A full charge takes ~2 hours and provides up to 6 hours playback / 60 hours standby.NOTICE: Fully charge the battery for first time use (until LED indicator turns off)Charging the Battery:1. Long press Volume & Volume buttons to adjust the volume.2. Shortly press Previous & Next buttons to skip track (if supported in host/app)3. Press Play/Pause to pause and/or resume music (if supported in host/app)Using Your Bluetooth Headwear:1. Press the button once to answer an incomming call or to hang up.2. Press the button fast twice to redial the last called number in the phone call log.Using Your Hands-free Speakerphone:PCUSB 5V 1AAC AdapterCharge from:USBPowerBankGood to know:Included:ChillBluetoothHeadwearMicro-USBCharging CableUser ManualIt takes up to 20 hours ofmusic playback for thespeakers to break-in for itsfull sound potential.The control panel should beon your left ear side.You can gentle adjust thespeaker position to fit youExperiment with a Equalizer(EQ) for your preferred sound.Always take out theelectronics before washingEnjoy your favorite music,stay warm and just ChillChillVol+ / NextMicro-USB chargingMicrophoneIndicator LEDVol- / PreviousPower On / OffPlay / PauseAnswer / Hang-Up / Redial+--+-+1. Gentle ease out the control panel and speaker from their pockets inside the dual layers.2. Depending on the design, your Headwear might have an opening / zipper in the rear.3. Delicate hand wash the Beanie (without electronics) cold & air dry flat. Do NOT wring hard or tumble dry!Washing & removal of electronics:Control PanelChill Bluetooth HeadwearD E N M A R KRoHScCUH
