CyberPower RB1280X2D

CyberPower RB1280X2D manual

(1)
  • +
    -
    -
    +
    -
    +
    -
    +
    1
    32
    MODEL: CP850AVRLCD, CP1000AVRLCD
    1
    2
    3
    1. Place the UPS on its top and remove the retaining screw (figure 1).
    2. Slide the battery compartment cover completely off of the unit (figure 2).
    3. Remove the battery from the compartment and disconnect the battery wires from the battery. Install the replacement
    battery by connecting the red wire to the positive (+) terminal and the black wire to the negative (-) terminal of the
    battery. (figure 3)
    4. Slide the battery compartment cover over the battery and tighten the retaining screw.
    5. Charge the unit for 4 – 8 hours to ensure the UPS performs expected runtimes.
    1. Place the UPS on its side and locate the battery compartment cover on the bottom of the UPS. Remove the four (4)
    retaining screws and pull the battery compartment cover off the UPS (figure 1 & 2).
    2. Remove the battery from the compartment and disconnect the battery wires from the batteries. Install the
    replacement batteries by connecting the red wire and black wire to the same color wires from the battery pack. Put
    the battery pack into the compartment (figure 3).
    3. Slide the battery compartment cover over the battery and tighten the retaining screw. Charge the unit for 4 – 8 hours
    to ensure the UPS performs expected runtimes.
    1. Carefully turn the UPS on its side. Remove the 6 retaining screws and the cover.
    2. Disconnect the black and red cable from the battery set.
    3. Remove the battery protection cover and take the battery pack out of the compartment.
    4. Slide a new battery pack into the unit. Assemble the battery protection cover,cable, screws in the reverse order of
    the previous steps. Recharge the unit for 4-8 hours to ensure the UPS performs expected runtime.
    1. Carefully placed the UPS on its side. Remove the 2 retaining screws then push the battery cover backward and
    remove the cover.
    2. Disconnect the battery wires from the battery, and then remove the battery from the compartment.
    REMINDER: For PP800/PP1100/PP1500T, 2 batteries are attached with one single plastic strip. You can pull the
    plastic strip to pull out the battery.
    3. Install the replacement battery by connecting the red wire to the positive (+) terminal of the battery and connecting
    the black wire to the negative (-) terminal of the battery.
    4. Slide the battery back into the compartment. Carefully turn the UPS upside down to help the batteries slide all the
    way into the compartment. Replace the cover and the retaining screws. Recharge the unit for 4 – 8 hours to ensure
    the UPS performs expected runtime.
    1. Place the UPS on its side to locate and remove the front panel retaining screws from the bottom of the UPS.
    2. Slide the cover (front panel) towards the bottom of the UPS.
    3. Remove it from the unit.
    4. Disconnect the cable located at the top of the cover.
    5. Disconnect the battery wires from the batteries.
    6. Remove the batteries from the compartment.
    7. Install the replacement batteries by connecting the red and black wires to the same color wires from the battery
    pack. Put the battery pack back into the compartment.
    8. Replace the battery compartment cover and tighten the retaining screw. Charge the unit for 4-8 hours to ensure the
    UPS performs expected runtimes.
    Intelligent LCD Series
    1
    2
    3
    6
    4
    5
    AVR Series
    1
    3 4
    2
    Professional Tower Series
    MODEL: PP800SW
    MODEL: PP1500SWT4, PP2200SW
    1 2
    4
    3
    K09-0000065-00
    BATTERY REPLACEMENT
    K09-0000065-00
    BATTERY REPLACEMENT
    MODEL: CP600LCD, CP825LCD, CP800AVR, CP685AVR-G, CP825AVR-G, CP685AVRLCD-G,
    CP825AVRLCD-G
    MODEL: CP900AVR, CP1200AVR, CP1500AVRT, CP1285AVRLCD, CP1350AVRLCD,
    CP1500AVRLCD
CyberPower RB1280X2D

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre CyberPower RB1280X2D o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de CyberPower RB1280X2D responder adecuadamente a su pregunta.

Vea el manual de CyberPower RB1280X2D aquí, de forma gratuita. Este manual pertenece a la categoría Pilas y ha sido calificado por 1 personas con un promedio de 8.3. Este manual está disponible en los siguientes idiomas: Engels. ¿Tiene alguna pregunta sobre CyberPower RB1280X2D o necesita ayuda? Haz tu pregunta aquí

Especificaciones de CyberPower RB1280X2D

General
Marca CyberPower
Modelo RB1280X2D
Producto Pila
EAN 649532607853
Idioma Engels
Tipo de archivo PDF
Características
Tecnología de batería Sealed Lead Acid (VRLA)
Capacidad de la batería 8 Ah
Voltaje de la pila 12 V
Compatibilidad CP1285AVRLCD, CP1200AVR
Color del producto Negro
Número de baterías incluidas 2 pieza(s)
Peso y dimensiones
Peso 5466 g
Ancho 202.1 mm
Altura 63.5 mm
Profundidad 150.9 mm
Condiciones ambientales
Intervalo de temperatura operativa 0 - 40 °C
Intervalo de humedad relativa para funcionamiento 0 - 90 %
Empaquetado
Ancho del paquete 304.8 mm
Altura del paquete 93 mm
Profundidad del paquete 250 mm
Peso del paquete 6078 g

ManualPDF.es

¿Busca un manual? ManualPDF.es asegura que encontrará el manual que está buscando en un abrir y cerrar de ojos. Nuestra base de datos contiene más de 1 millón de manuales en PDF de más de 10.000 marcas. Cada día añadimos los últimos manuales para que siempre encuentres el producto que buscas. Es muy sencillo: simplemente escriba el nombre de la marca y el tipo de producto en la barra de búsqueda y podrá ver instantáneamente el manual de su elección en línea de forma gratuita.

ManualPDF.es

© Copyright 2021 ManualPDF.es. Todos los derechos reservados.

Utilizamos cookies para asegurar que damos la mejor experiencia al usuario en nuestro sitio web. Si continúa utilizando este sitio asumiremos que está de acuerdo.

Leer más