Edge Boost Pro Micro manual

Edge Boost Pro Micro
5.1 · 1
PDF manual
 · 1 pagina
Inglés
manualEdge Boost Pro Micro
INSTALLATION (continued)SYSTEM REQUIREMENTS
Version 1013-1.6INTRODUCTION
● A computer with a Micro SATA interface connector
● An available Micro SATA power connector
Ensure all power sources, including the wall power adapter and battery,
are disconnected from your system before installing
Do not expose the SSD to extreme temperatures or sunlight
Do not touch the gold SATA connectors of the SSD
Be conscious of static electricity—wear a wrist strap while installing the
SSD to minimize this
The EDGE Boost SSD comes with a powerful AES hardware encryption chip. When
enabled, the SSD becomes impossible to access without knowing the password.
Even if the SSD is physically removed from your system, all stored data is invisible
and secure. Not all systems support drive encryption (also called the ATA Security
Password)—please consult your system’s user manual to ensure this feature is
available.
You must first enable the drive encryption to use it. Enabling this function varies
from system to system, but the following is a typical example
(IMPORTANT: Your
SSD will be permanently inaccessible if you forget or lose your password!):
1. After installing the SSD, access your computer’s BIOS during system startup.
2. Select the “Security” option.
3. Select the “Password” option.
4. Select the option displayed as “Hard Disk Password” or similar for the Boost SSD.
5. Create and reconfirm a password. After complete, the encryption function is
active. You will need to input your password every time you start your computer to
access the SSD.
1. Ensure all power sources, including the wall power adapter and
battery, are disconnected from your system.
2. Disassemble your computer’s casing and locate the hard drive.
3. Remove the old hard drive and replace with the Boost SSD. If the old
hard drive has any hardware attached to it, remove it and attach to
the Boost SSD in the same manner.
4. After the install is complete, reassemble the computer to its original
state and restore power.
5. Power on the system and ensure that the system’s BIOS recognizes
the Boost SSD. Note: You will need to format the SSD before use if
you plan to use it as a secondary storage drive.
PRECAUTIONSUSING THE ENCRYPTION FUNCTIONWARRANTYThis SSD is backed by a 5-year warranty. When properly installed, EDGE Memory warrants that this product will be free from substantial defects in material and workmanship for the aforementioned warranty period. For complete warranty details, please visit www.EDGEMemory.com.

1.8" SOLID STATE DRIVE

EDGE BOOST MICRO SSD

Help getting started with your EDGE Boost Micro Solid State Drive

Quick Start Guide

INSTALLATION
Your installation experience will vary depending on the type of notebook
or other system you install the Boost SSD into—refer to your system’s
user manual while installing. The following are some general directions
that may help while installing:
FORMATTINGThe Boost SSD comes unformatted—you must format the device before using. The following instructions are designed for Windows 7. Other versions of Windows will be similar, but may vary. If using a Mac, please access
Utilities -> Disk Utility -> Partition to initiate a format.
1. Right click on
Computer (or My Computer) and select Manage.
2. Select
Disk Management in the left pane.
3. You will receive an
Initialize Disk prompt—this will only apply to any
unformatted devices you have installed (i.e. – the SSD). Choose
MBR,
note the Disk number (ex Disk 1, Disk 2, etc), and select
OK.
4. In the bottom pane of Disk Management, find the disk number from step 3. Right-click on the
unallocated box and select New Simple Volume.
5. The
New Simple Volume/Partition wizard will appear. Select Next on
the first screen.6. On the
Specify Volume Size screen, ensure the Simple Volume size
number matches the maximum disk space (default). Select
Next.
7.
Assign a drive letter not already in use to the SSD. Select Next.
8. Choose a file system format (NTFS recommended for Windows) with a
default allocation unit size and give the SSD a Volume Label name.
Check
perform a quick format and uncheck enable file and folder
compression
. Click Next.9. Review the wizard summary and select
Finish. The SSD will be
formatted. Once complete, you can close
Computer Management.
FORMATTING (continued)
www.EDGEMemory.com/support
CUSTOMER SUPPORT
Need Help?
Thank you for purchasing an EDGE Boost SSD! This guide is designed to give you basic information on installing and using the SSD, as well as some precautions to adhere to.It is important to be familiar with the environment in which you plan to install the SSD in before getting started. Disassembling and reassembling covers, lids, bezels, and other items may be required for installation. Please consult your system’s user manual or contact an IT professional for assistance if you are unsure about the install process.Please note that additional accessories such as brackets or trays may be required to properly install your SSD.

Manual

Vea el manual de Edge Boost Pro Micro aquí, de forma gratuita. Este manual pertenece a la categoría Unidades de estado sólido (SSD ) y ha sido calificado por 1 personas con un promedio de 5.1. Este manual está disponible en los siguientes idiomas: Inglés. ¿Tiene alguna pregunta sobre Edge Boost Pro Micro o necesita ayuda? Haz tu pregunta aquí

¿Necesita ayuda?

¿Tienes alguna pregunta sobre el Edge Boost Pro Micro y no encuentras la respuesta en el manual? Haz tu pregunta aquí. Describe de forma clara y completa tu problema y haz tu pregunta. Cuanto mejor expliques el problema y formules tu pregunta, más fácil será para otros propietarios de dispositivos Edge Boost Pro Micro proporcionarte una respuesta útil.

Número de preguntas: 0

Especificaciones de Edge Boost Pro Micro

A continuación encontrarás las especificaciones del producto y las especificaciones del manual del Edge Boost Pro Micro.

General
Marca Edge
Modelo Boost Pro Micro
Producto Unidad de estado sólido (SSD )
EAN 652977236939, 6529772369398, 652977236953, 6529772369534, 652977242435, 6529772424356, 652977245054, 6529772450546, 0652977242435
Idioma Inglés
Tipo de archivo Manual de usuario (PDF)
Características
SDD, capacidad 60 GB
Interfaz micro SATA
Velocidad de lectura 550 MB/s
Velocidad de escritura 520 MB/s
Tipo de memoria MLC
Velocidad de transferencia de datos 6 Gbit/s
Algoritmos de seguridad soportados 256-bit AES
Soporte S.M.A.R.T. Si
Soporte TRIM Si
ECC Si
Tiempo medio entre fallos 2000000 h
Sistema operativo Windows soportado Si
Factor de forma de disco SSD 1.8"
Otras características
IOPS máximas (operaciones de entrada / salida por segundo) 80000
Interno Si
Color del producto Metálico
Control de energía
Consumo de energía (lectura) 3 W
Consumo de energía (escritura) 3 W
Consumo de energía (espera) 1 W
Condiciones ambientales
Intervalo de temperatura operativa 0 - 70 °C
Intervalo de temperatura de almacenaje -40 - 85 °C
Golpes en funcionamiento 1500 G
Vibración operativa 3.1 G
Peso y dimensiones
Ancho 54 mm
Profundidad 78.5 mm
Altura 5 mm
Peso 45 g
mostrar más

Preguntas frecuentes

¿No encuentras la respuesta a tu pregunta en el manual? Puede que encuentres lo que buscas en la sección de preguntas frecuentes sobre el Edge Boost Pro Micro más abajo.

¿Tu pregunta no está en la lista? Haz tu pregunta aquí

No hay resultados