Hobbywing EzRun-3652SL

Hobbywing EzRun-3652SL manual

(1)
  • • Never leave this product unsupervised when it is powered on.
    • Ensure all wires and connections are well insulated before connecting the motor to related devices,
    as short circuit will damage your motor.
    • Read through the manuals of all power devices and chassis and ensure the power configuration is
    rational before using this unit.
    • Never hit full throttle before installing the pinion, as high speed rotation may cause damage to the
    motor in circumstances of no load.
    • Ensure all devices are well connected, in order to prevent poor connection that may cause your
    vehicle to lose control or other unpredictable issues such as damage to the device.
    • Stop using the motor when its shell temperature exceeds 100/212; otherwise the rotor may be
    demagnetized and cause irreversible damage to your motor.
    It’s important to select the FDR/gear ratio properly, as improper FDR/gear ratio may cause you great loss. Therefore, please choose the gear ratio by referring to the following points!
    1. Operating Temperature of the Motor
    The motor temperature should be lower than 100 (212) during the operation. Temperatures above 100 will weaken the magnet and may partly melt the coils and eventually damage the ESC (because of strong
    current). Therefore, the most effective way to prevent overheat is to select the right gear ratio.
    Note: We recommend enabling the Motor Thermal Protection (on the ESC) when you are pairing the motor with a HOBBYWING EZRUN MAX10/MAX10-SCT ESC.
    2. Principle of Gear Ratio Selection
    To avoid potential risks such as ESC/motor damage or malfunction caused by overheat, please start with a very small pinion first and check the ESC & motor temperatures regularly throughout the run. This is the only
    way to guarantee that your motor won’t overheat. If the motor and ESC temperatures remain stable and low in the running, then you can slowly increase the pinion size while monitoring temperatures to determine
    the safe gearing for your vehicle, climate and track condition. Because these elements may change, so please keep monitoring the ESC & motor temperatures to protect your electronics from damage.
    Warnings
    CAUTIONS
    Thank you for purchasing the EZRUN 3652/3660 G2, HOBBYWING’s high performance
    sensorless brushless motor! Brushless power systems can be very dangerous, any
    improper use may cause personal injury and damage to the product and related devices.
    We strongly recommend reading through this user manual before use. Because we have
    no control over the use, installation, or maintenance of this product, no liability may be
    assumed for any damages or losses resulting from the use of this product. We do not
    assume responsibility for any losses caused by unauthorized modifications to our product.
    ATTENTION
    ATTENTION
    01
    05
    FDR/Gear Ratio Selection
    02
    Features
    06
    Assembly/Disassembly
    For prolonging the motor life and raising its efficiency, we recommend checking and cleaning the motor regularly. About the frequency, it depends on the times you use the motor and the track condition. Please refer to
    the following diagrams to assemble your motor and dismantle it in the reverse order if necessary.
    Parts List
    USER MANUAL
    EZRUN 3652/3660 G2
    Sensorless Brushless Motor
    04
    Installation & Connection
    1. How to Mount the Motor into a RC vehicle
    M3 mounting screws (6*M3) are needed here, as the mounting holes are 5mm in depth, so we don’t
    recommend using the M3 screws with the length exceeds 8mm to mount the motor into your vehicle.
    2. How to Connect the Motor to an ESC
    There is no polarity on the A/B/C three ESC-to-motor wires, so do not worry about how you connect
    them initially. You may find it necessary to swap two wires if the motor runs in reverse. When pairing
    with a HOBBYWING EZRUN MAX10/MAX10-SCT ESC, plug the ZH-2Y male connector on the ESC into
    the TEMP port at the load end of the motor can make the motor thermal protection available.
    3. Recheck the Installation & Connections
    Recheck the installation and all the connections before turning on the power.
    1. Mount the motor rotor 2. Mount the back end bell set
    3. Mount screws for fastening
    the back end bell
    4. Mount the front end bell set
    5. Mount screws for fastening
    the front end bell
    6. Picture of the assembled motor
    03
    Specifications
    3300
    4000
    5400
    3200
    4000
    4600
    0.0100
    0.0074
    0.0051
    0.0083
    0.0060
    0.0053
    4.3A
    5.2A
    7.2A
    4.9A
    5.7A
    7.2A
    218
    216
    217
    262
    268
    262
    1:10 Scale Touring Car/Buggy(Sport)
    1:10 Scale SCT (2WD)
    1:10 Scale Monster Truck/Truck (Light-duty)
    1:10 Scale SCT (4WD)
    1:10 Scale Monster Truck/Truck (Heavy-duty)
    30402600
    30402601
    30402602
    30402650
    30402651
    30402652
    2-3S
    2-3S
    2S
    2-3S
    2-3S
    2S
    Φ=36 / L=52
    Φ=36 / L=60
    4
    Φ=3.175 / L=15
    Φ=5 / L=18.5
    EZRUN-3652SL-3300KV-G2
    EZRUN-3652SL-4000KV-G2
    EZRUN-3652SL-5400KV-G2
    EZRUN-3660SL-3200KV-G2
    EZRUN-3660SL-4000KV-G2
    EZRUN-3660SL-4600KV-G2
    EZRUN 3652/3660 G2EZRUN 3652 G2 EZRUN 3660 G2EZRUN 3652 G2EZRUN 3660 G2
    3-175 12AWG Black
    Slilcone Wires
    3-175 12AWG Black
    Slilcone Wires
    3-
    Ø
    4 GBC
    60.5 18.5 15 52.5
    14
    Ø
    25.4
    Ø
    5
    6-M3
    60°
    CCW
    4.5
    Ø
    3.175
    Ø
    35.9
    3-
    Ø
    3.5 GBC
    Ø
    35.9
    2.8
    15
    Model PN
    KV
    (No-load)
    No-load
    Current
    Motor Diameter
    & Length
    Shaft Diameter
    & Length
    Poles W (g) ApplicationsLiPo R. (Ω)
    Wire B
    Wire A
    Wire C
    EZRUN 3660 G2
    EZRUN MAX10 SCT
    ZH-2Y
    Front End Bell X 1PCS
    Back End Bell x 1PCS
    Stator Set x 1PCS
    Screws for Fastening
    the Back End Bell
    3PCS (M2.50x3.0mm)
    Rotor x 1PCS
    Screws for Fastening the
    Front End Bell x 3PCS
    (M3.0x5.0mm)
    1 2 3
    4 5 6
    • Innovative 4-pole-8-magnet "staggered pole" rotor (Hobbywing-patented) with low cogging effect and torque pulsation greatly improves control feel around corners.
    • Built-in temperature sensor and sensor port protect the motor from damage due to overheat when pairing EZRUN 3652/3660 G2 with a EZRUN MAX10/MAX10 SCT ESC.
    • O-ring seal fitted between the front end bell and motor case isolates screw holes from inner parts to prevent liquid or dust from getting inside and protect motor from damage.
    • Special design implemented by the motor case (the end attaches to the front end bell) isolates inner coils from outside to protect winding from being damaged by overlong screws.
    • Special technology for temperature control implemented by this motor guarantees less heat more efficiency (efficiency rate of up to 90%).
    • CNC machined aluminum housing, high purity copper windings, advanced rotor structure, high-quality alloy steel output shaft, high-precision bearings for high durability and smoothness.
    • Rebuild-able design (partially rebuild-able) for routine maintenance effectively prolongs the motor life and raises the motor efficiency.
    • Excellent match between EZRUN 3652/3660 G2 with EZRUN MAX10/MAX10 SCT guarantees users large torque plus a very smooth and linear power band.
Hobbywing EzRun-3652SL

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre Hobbywing EzRun-3652SL o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Hobbywing EzRun-3652SL responder adecuadamente a su pregunta.

Vea el manual de Hobbywing EzRun-3652SL aquí, de forma gratuita. Este manual pertenece a la categoría Juguetes de radiocontrol y ha sido calificado por 1 personas con un promedio de 9.9. Este manual está disponible en los siguientes idiomas: Inglés. ¿Tiene alguna pregunta sobre Hobbywing EzRun-3652SL o necesita ayuda? Haz tu pregunta aquí

Especificaciones de Hobbywing EzRun-3652SL

General
Marca Hobbywing
Modelo EzRun-3652SL
Producto Juguete de radiocontrol
EAN 6938994406147
Idioma Inglés
Tipo de archivo PDF
Características
Tipo de producto Motor
Marca compatible Hobbywing
Componente para Coche/Camión
Compatibilidad -
Tipo de Motor Motor sin escobillas
Diámetro del eje 3.175mm
Número de polos 4
Color del producto Negro
Constante de velocidad (kv) del motor 3300
Batería
Tecnología de batería Polímero de litio
Control de energía
Corriente sin carga 4.3A
Peso y dimensiones
Peso -g
Longitud del motor 52mm
Diámetro del motor 36mm
Peso del motor 218g

Preguntas frecuentes

A continuación, encontrarás las preguntas más frecuentes sobre el Hobbywing EzRun-3652SL .

¿Tu pregunta no está en la lista? Haz tu pregunta aquí

ManualPDF.es

¿Busca un manual? ManualPDF.es asegura que encontrará el manual que está buscando en un abrir y cerrar de ojos. Nuestra base de datos contiene más de 1 millón de manuales en PDF de más de 10.000 marcas. Cada día añadimos los últimos manuales para que siempre encuentres el producto que buscas. Es muy sencillo: simplemente escriba el nombre de la marca y el tipo de producto en la barra de búsqueda y podrá ver instantáneamente el manual de su elección en línea de forma gratuita.

ManualPDF.es

© Copyright 2020 ManualPDF.es. Todos los derechos reservados.

Utilizamos cookies para asegurar que damos la mejor experiencia al usuario en nuestro sitio web. Si continúa utilizando este sitio asumiremos que está de acuerdo.

Leer más