Hobbywing XeRun-4268SD-2600KV-G2

Hobbywing XeRun-4268SD-2600KV-G2 manual

(1)
  • Warnings
    CAUTIONS
    Thank you for purchasing HOBBYWING XERUN 4268/4274 Sensored Brushless Motor.
    High power motor can be very dangerous, so please read through this manual carefully.
    Given that we have no control over the correct use, installation, application,
    or maintenance of our products, no liability shall be assumed nor accepted for any
    damages, losses or costs resulting from the use of the product. Any claims arising from
    the operating, failure or malfunction etc. will be denied. We assume no liability for
    personal injury and/or consequential damages resulting from our product or our
    workmanship. As far as is legally permitted, the obligation to compensation is limited to
    the invoice amount of the affected product.
    ATTENTION
    ATTENTION
    01
    03
    Specifications
    04
    Installation & Connection
    06
    Gearing
    (With the motor direction set to CCW), take the graduation/value after “CCW” on the motor case as
    the starting point when adjusting the timing. (With the reversed triangle pointing at a value/graduation,
    the smaller/bigger the value, the smaller/bigger the timing. The timing is 40 degrees in picture 1.
    (With the motor direction set to CW), take the graduation/value after “CW” on the motor case as the
    starting point when adjusting the timing. (With the reversed triangle pointing at a value/graduation,
    the smaller/bigger the value, the smaller/bigger the timing. The timing is 20 degrees in picture 1.
    The motor timing is 30 degrees by default (as shown in picture 2). The motor timing should be with in
    30 to 40 degrees if you want to activate the Turbo timing. And the timing can be within 20 to 40
    degrees if you have no intention to activate the Turbo timing.
    05
    Timing Adjustment
    02
    Features
    07
    Assembly and Disassembly
    Install the motor in its mount using M3 & M4 screws no longer than 8mm. (*M3: 4PCS, M4: 2PCS)
    There are 3 power wires coming from the ESC must be soldered to the motor. They are usually color
    coded as Blue for Wire A, Yellow for Wire B and Orange for Wire C. When connecting the power
    wires between the ESC and motor, please make sure that you match ESC Wire A to Motor Phase A,
    ESC Wire B to Motor Phase B and ESC wire C to Motor Phase C (This is VERY important).
    When using Sensored ESC, make sure the sensor cable is clean and reliable. Connect the sensor cable
    to both ESC and motor in the correct direction.
    When using Sensorless ESC, swap any two wires if the motor runs in reverse.
    Double check you have all the connections correct before turning on the ESC (See connection
    diagram as below).
    The XERUN 4268/4274 is very strong in construction but also easy to disassemble for maintenance.
    We recommend you check the bearings and clean the motor at regular intervals——depend on the frequency of usage and the track surface.
    Please follow the steps in below to assemble the motor. When disassembling the motor, the sequences are reversed.
    Parts List
    USER MANUAL
    XERUN 4274 / 4268
    Sensored Brushless Motor
    • Never leave this unit unsupervised when it is powered on.
    • All wires and connections should be well insulated. Short circuits can possibly damage the products.
    • Avoid incorrect connections between the electronic speed controller (ESC) and the motor.
    • Never allow this product to come in contact with water, oil, fuel or other electro-conductive liquids.
    If this happens, stop the use of your product immediately and let it dry carefully.
    • Avoid overloading the motor due to wrong or too aggressive gear ratio. Different ESCs have
    different internal timings, follow the ESC instructions.
    • Never apply full throttle if the pinion is not installed. Due to the extremely high RPMs without load,
    the motor can get damaged.
    • Always wire up all the parts of the equipment carefully. If any of the connections come loose as a
    result of vibration, your model RC may lose control.
    • Never allow the motor case to get over 100 degrees Celsius (212 degrees Fahrenheit) because the
    magnets maybe demagnetized by high temperature.
    • Built-in chip for being easily identified by HOBBYWING ESCs. When pairing with HW 1/8th scale Sensored ESCs (i.e. XR8 Plus), the motor can work in the “Sensored” mode at all times with great output linearity after
    it’s identified by the ESC. And the Turbo timing is allowed to be activated for higher output.
    • Magnetic ring on the rotor prevents the motor from signal interference and guarantees its super stability in the “sensored” mode.
    • Low cogging torque for smooth and stable low-speed running of the vehicle.
    • Selectable mechanical timing of 20 to 40 degrees for different power output.
    • New-style “U” solder tabs for easy soldering/wiring and high durability.
    • CNC machined aluminum ribbed heatsink case with excellent coating.
    • High temperature tolerance windings, high quality output shaft, high precision bearings, and rotor with a strong structure guarantees super durability.
    1 2 3 3
    Mount the motor rotor Mount the back end bell set
    Mount screws for fastening
    the back end bell
    Picture of the
    assembled motor
    Back End Bell x 1Pcs
    Stator Set x 1Pcs
    Screws for Fastening the
    Back End Bell x 2Pcs
    Rotor x 1Pcs
    picture 1 picture 2
    Model
    Buggy
    W/FDR
    XERUN-4268SD-1600KV-BLACK-G2
    XERUN-4268SD-1900KV-BLACK-G2
    XERUN-4268SD-2600KV-BLACK-G2
    XERUN-4274SD-2250KV-BLACK-G2
    LiPo
    4S
    4S
    4S
    6S
    4KG/8
    4KG/9
    /
    /
    On-road
    W/FDR
    /
    /
    3KG/6
    /
    Truck
    W/FDR
    /
    /
    /
    5KG/12
    Monster Truck
    W/FDR
    /
    /
    /
    6KG/16
    Recommended Power Configuration
    Motor B
    Motor A
    Motor C
    XERUN 4274
    Brushless Electronic Speed Controller
    Sensor wire
    XERUN 4268/4274 XERUN 4268/4274XERUN 4268 XERUN 4274
    Model
    KV
    (No-load)
    No-load
    Current
    Dimension
    (mm)
    shaft *
    (mm)
    Pole W (g) Applicable
    XERUN-4268SD-1600KV-BLACK-G2
    XERUN-4268SD-1900KV-BLACK-G2
    XERUN-4268SD-2600KV-BLACK-G2
    XERUN-4274SD-2250KV-BLACK-G2
    1600
    1900
    2600
    2250
    0.0151
    0.0084
    0.0051
    0.0047
    2.8A
    4.5A
    4.6A
    5.4A
    322
    325
    328
    396
    PN
    30401900
    30401901
    30401902
    30405000
    LiPo R. (Ω)
    2-6s
    2-6s
    2-4s
    2-6s
    Φ=42 / L=68
    Φ=42 / L=68
    Φ=42 / L=68
    Φ=42 / L=74
    Φ=5 / L=18.5
    4
    1/8 Buggy
    1/8 On-road
    1/8 Monster Truck/Truck
    Attention! The motor temperature should be lower than 100 degrees Celsius (212 degrees Fahrenheit) in operation. Because high
    temperature may cause the magnets to get demagnetized, the coil to get melt and short circuited, and the ESC to get damaged.
    A suitable gearing can effectively prevent the motor from overheating.
    • To avoid the possible damage to ESC and motor caused by the overheat, please start with a small pinion/a big FDR and check the
    motor temperature regularly. If the motor and ESC temperatures always stay at a low level during the operation, change a big
    pinion/a low FDR and also check the motor temperature regularly to ensure that the new FDR is suitable for your vehicle, local
    weather and track condition. (Note: For the safety of electric devices, please check the ESC and motor temperatures regularly.)
    Right is a very rough idea of starting gear ratios for the motors, please be aware that these are guide ratios for ESC with ZERO
    timing.
Hobbywing XeRun-4268SD-2600KV-G2

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre Hobbywing XeRun-4268SD-2600KV-G2 o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Hobbywing XeRun-4268SD-2600KV-G2 responder adecuadamente a su pregunta.

Vea el manual de Hobbywing XeRun-4268SD-2600KV-G2 aquí, de forma gratuita. Este manual pertenece a la categoría Juguetes de radiocontrol y ha sido calificado por 1 personas con un promedio de 8.6. Este manual está disponible en los siguientes idiomas: Inglés. ¿Tiene alguna pregunta sobre Hobbywing XeRun-4268SD-2600KV-G2 o necesita ayuda? Haz tu pregunta aquí

Especificaciones de Hobbywing XeRun-4268SD-2600KV-G2

General
Marca Hobbywing
Modelo XeRun-4268SD-2600KV-G2
Producto Juguete de radiocontrol
EAN 6938994409889
Idioma Inglés
Tipo de archivo PDF
Características
Tipo de producto Motor
Marca compatible Hobbywing
Componente para Coche
Compatibilidad -
Tipo de Motor Motor sin escobillas
Número de polos 4
Longitud del eje 15mm
Diámetro del eje 5mm
Color del producto Negro
Constante de velocidad (kv) del motor 2600
Peso y dimensiones
Peso -g
Longitud del motor 68mm
Diámetro del motor 42mm
Peso del motor 328g
Batería
Tecnología de batería Polímero de litio
Control de energía
Corriente sin carga 4.6A

Preguntas frecuentes

A continuación, encontrarás las preguntas más frecuentes sobre el Hobbywing XeRun-4268SD-2600KV-G2 .

¿Tu pregunta no está en la lista? Haz tu pregunta aquí

ManualPDF.es

¿Busca un manual? ManualPDF.es asegura que encontrará el manual que está buscando en un abrir y cerrar de ojos. Nuestra base de datos contiene más de 1 millón de manuales en PDF de más de 10.000 marcas. Cada día añadimos los últimos manuales para que siempre encuentres el producto que buscas. Es muy sencillo: simplemente escriba el nombre de la marca y el tipo de producto en la barra de búsqueda y podrá ver instantáneamente el manual de su elección en línea de forma gratuita.

ManualPDF.es

© Copyright 2020 ManualPDF.es. Todos los derechos reservados.

Utilizamos cookies para asegurar que damos la mejor experiencia al usuario en nuestro sitio web. Si continúa utilizando este sitio asumiremos que está de acuerdo.

Leer más