• Mount the camera indoors or outdoors. For outdoor
installation, mount it in a sheltered place where it is not
directly exposed to rain or snow.
• Aim the Cameras to best optimize the viewing area:
Select a location for the camera that provides a clear
view of the area you want to monitor, which is free from
dust, and is not in line-of-sight to a strong light source
or direct sunlight.
• Avoid installing the cameras where there are thick
walls, obstructions, or interference (i.e. transformers,
microwave ovens or other electrical equipment)
between the Cameras and the Receiver.
• Select a location for the camera that has an ambient
temperature between 14°F~122°F (-10°C~50°C)
• Before starting permanent installation, have another
person hold the camera for you while you verify its
performance by observing the image on a monitor.
INSTALLING THE CAMERA
Before you install the camera, carefully plan where and how it will be
positioned, and where you will route the cable that connects the
camera to the power adaptor.
INSTALLATION WARNINGS
1. Carefully unpack the Camera.
2. Mount the stand to the wall:
• Mark the position of the
screw holes on the wall.
• Drill holes and insert the
drywall plugs as needed.
• Firmly attach the stand
to the wall using the
provided screws.
3. Attach the Antenna to the
Camera prior to mounting.
4. Place the camera in the
desired mounting position.
Tighten the thumbscrews
to secure the camera to the
Stand. Adjust the angle of
the camera until the
desired view is set.
*May not be exactly as shown
NOTE: AVOID INSTALLING IN A
LOCATION WHICH REQUIRES
THE WIRELESS SIGNAL TO PASS
THROUGH CEMENT, CONCRETE
AND METAL STRUCTURES. THIS
WILL REDUCE THE
TRANSMISSION RANGE.
Mounting
Hardware Kit
COLOR DIGITAL WIRELESS INDOOR/OUTDOOR
ACCESSORY MOTION CAMERA
LW2701AC1 SERIES - QUICK START GUIDE
CAMERA OVERVIEW
1. PIR Sensor: Passive IR motion sensor for more accurate
motion recording.
2. Microphone: Built-in microphone underneath camera body.
3. Lens: Camera lens.
4. Night Vision IR: Night vision IR LEDs used for viewing in
complete darkness.
5. Speaker: Speaker for two-way audio.
6. Pair: Pairing button.
7. Antenna: Wireless antenna.
8. Power Cable: Connect the included power adapter to the
cable extending from the camera.
7
Whatsapp
Mail
Facebook
¿Necesita ayuda?
Número de preguntas: 0
¿Tiene alguna pregunta sobre Lorex LW2701AC1 o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Lorex LW2701AC1 responder adecuadamente a su pregunta.
Acerca de Lorex LW2701AC1
Vea el manual de Lorex LW2701AC1 aquí, de forma gratuita. Este manual pertenece a la categoría Cámaras de vigilancia y ha sido calificado por 1 personas con un promedio de 8.2. Este manual está disponible en los siguientes idiomas: Engels. ¿Tiene alguna pregunta sobre Lorex LW2701AC1 o necesita ayuda? Haz tu pregunta aquí
A continuación, encontrarás las preguntas más frecuentes sobre el Lorex LW2701AC1 .
¿Qué es un megapíxel?
El número de megapíxeles indica cuántos píxeles hay en el sensor. 1 megapíxel equivale a 1 millón de píxeles. Cuantos más píxeles, mayor será la calidad de imagen potencial.
Utilizamos cookies para asegurar que damos la mejor experiencia al usuario en nuestro sitio web. Si continúa utilizando este sitio asumiremos que está de acuerdo.
LW2701AC1 SERIES QSG_EN_R2 Page 1www.lorextechnology.comCONTENTS:Quick Start GuideDigital Wireless ColorCamera with StandWireless Antennafor cameraPower Adaptorfor camera*• Mount the camera indoors or outdoors. For outdoorinstallation, mount it in a sheltered place where it is notdirectly exposed to rain or snow.• Aim the Cameras to best optimize the viewing area:Select a location for the camera that provides a clearview of the area you want to monitor, which is free fromdust, and is not in line-of-sight to a strong light sourceor direct sunlight.• Avoid installing the cameras where there are thickwalls, obstructions, or interference (i.e. transformers,microwave ovens or other electrical equipment)between the Cameras and the Receiver.• Select a location for the camera that has an ambienttemperature between 14°F~122°F (-10°C~50°C)• Before starting permanent installation, have anotherperson hold the camera for you while you verify itsperformance by observing the image on a monitor.INSTALLING THE CAMERABefore you install the camera, carefully plan where and how it will bepositioned, and where you will route the cable that connects thecamera to the power adaptor.INSTALLATION WARNINGS1. Carefully unpack the Camera.2. Mount the stand to the wall:• Mark the position of thescrew holes on the wall.• Drill holes and insert thedrywall plugs as needed.• Firmly attach the standto the wall using theprovided screws.3. Attach the Antenna to theCamera prior to mounting.4. Place the camera in thedesired mounting position.Tighten the thumbscrewsto secure the camera to theStand. Adjust the angle ofthe camera until thedesired view is set.*May not be exactly as shownNOTE: AVOID INSTALLING IN ALOCATION WHICH REQUIRESTHE WIRELESS SIGNAL TO PASSTHROUGH CEMENT, CONCRETEAND METAL STRUCTURES. THISWILL REDUCE THETRANSMISSION RANGE.MountingHardware KitCOLOR DIGITAL WIRELESS INDOOR/OUTDOORACCESSORY MOTION CAMERALW2701AC1 SERIES - QUICK START GUIDECAMERA OVERVIEW1. PIR Sensor: Passive IR motion sensor for more accuratemotion recording.2. Microphone: Built-in microphone underneath camera body.3. Lens: Camera lens.4. Night Vision IR: Night vision IR LEDs used for viewing incomplete darkness.5. Speaker: Speaker for two-way audio.6. Pair: Pairing button.7. Antenna: Wireless antenna.8. Power Cable: Connect the included power adapter to thecable extending from the camera.7
