Lux LV21-005

Lux LV21-005 manual

(1)
  • Installation and Operating Instructions
    MECHANICAL LINE VOLTAGE THERMOSTAT
    Model LV21 - Double-Pole, Heating Only
    C
    O
    O
    L
    E
    R
    C
    O
    M
    F
    O
    R
    T
    Z
    O
    N
    E
    W
    A
    R
    M
    E
    R
    O
    F
    F
    (TO HEATER)
    BLACK, L1-OUT
    RED, L1-IN
    (CIRCUIT BREAKER)
    (TO HEATER)
    BLACK, L2-OUT
    RED, L2-IN
    (CIRCUIT BREAKER)
    L2
    L1
    WARNING:
    This thermostat directly controls line voltage (120/240 VAC). Do not attempt
    to install this thermostat unless you are completely familiar with line
    voltage wiring. If proper precautions are not followed, a risk of electric
    shock may exist, possibly causing severe injury or death. Disconnect the
    supply voltage at the circuit breaker prior to removing the existing
    thermostat or installing this one.
    RISK OF FIRE HAZARD:
    If the electrical conductors to your thermostat wall box are aluminum,
    DO NOT
    use the wire nuts supplied with this thermostat. Connections to
    aluminum wiring must be made using approved CO/ALR solder-less wire
    connectors specifically made for use with aluminum conductors. NOTE: the
    wires on this thermostat are copper, with a nickel coating to prevent
    corrosion.
    THERMOSTAT SPECIFICATIONS AND ELECTRICAL RATINGS:
    22 AMPS @ 120/240 VAC (2640/5280W RESISTIVE LOAD)
    22 AMPS @ 208 VAC (4576W RESISTIVE LOAD)
    22 AMPS @ 277 VAC (4986W RESISTIVE LOAD)
    0.75 HP @ 120 VAC (INDUCTIVE LOAD)
    1.50 HP @ 208/240/277 VAC (INDUCTIVE LOAD)
    ETL LISTED (USA AND CANADA)
    SETTING RANGE: 41°F - 90°F (5°C - 32°C)
    INSTALLATION NOTE:
    On this LV21 model, only the L1-IN/OUT path is broken during normal
    temperature regulation; the L2-IN/OUT path is only broken when the set
    temperature knob is turned to the OFF position.
    INSTALLATION INSTRUCTIONS:
    1. Disconnect the supply power before removing your old thermostat (if
    applicable), and keep it off until after you have completed the instal-
    lation.
    2. If replacing an old thermostat, remove it carefully to avoid damaging the
    wires or the insulation. Check the existing wire insulation for cracks,
    nicks, or fraying. Apply electrical tape where necessary to achieve
    adequate insulation, or replace the wires in an approved fashion.
    3. Be sure to use the appropriate wires on the thermostat: the RED
    thermostat wires shall be connected to the voltage supply wires from the
    circuit breaker, and the BLACK thermostat wires shall be connected to
    the wires going to the heating appliance.
    4. Perform the wire connections using appropriately sized solder-less wire
    connectors (provided), and be sure that ALL wire connections are
    securely tightened.
    5. Carefully bend any excess wire length into the rear of the electrical box
    to allow enough room for the thermostat to be comfortably secured to
    the wall box without having to force it. Ensure that the wires are
    positioned so that the mounting screws will not damage the wire
    insulation when they are installed.
    6. Once complete, turn the power back on to your heating equipment at the
    circuit breaker and confirm proper heating operation in all thermostat
    dial positions.
    TECHNICAL ASSISTANCE:
    If you have any problems installing or using this thermostat, please
    carefully and thoroughly review the instruction manual. If you require
    assistance, please contact our Technical Assistance Department at
    856-234-8803 during regular business hours between 8:00AM and 4:30PM
    Eastern Time, Monday through Friday. You can also receive technical
    assistance online anytime day or night at http://www.luxproducts.com. Our
    web site offers you answers to the most common technical questions, and
    also permits you to email your questions to our technical support staff at
    your convenience.
    LIMITED WARRANTY:
    If this unit fails because of defects in materials or workmanship within
    three years of the date of original purchase, LUX will, at its option, repair
    or replace it. This warranty does not cover damage by accident, misuse, or
    failure to follow installation instructions. Implied warranties are limited in
    duration to three years from the date of original purchase. Some states do
    not allow limitations on how long an implied warranty lasts, so the above
    limitation may not apply to you. Please return malfunctioning or defective
    units to the location from which the purchase was made, along with proof
    of purchase. Please refer to "TECHNICAL ASSISTANCE" before returning
    thermostat. Purchaser assumes all risks and liability for incidental and
    consequential damage resulting from installation and use of this unit.
    Some states do not allow the exclusion of incidental or consequential
    damages, so the above exclusion may not apply to you. This warranty
    gives you specific legal rights and you may also have other rights which
    vary from state to state. Applicable in the U.S.A. and Canada only.
    © 2014 LUX PRODUCTS CORPORATION. ALL RIGHTS RESERVED
    52195
Lux LV21-005

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre Lux LV21-005 o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Lux LV21-005 responder adecuadamente a su pregunta.

Vea el manual de Lux LV21-005 aquí, de forma gratuita. Este manual pertenece a la categoría Termostatos y ha sido calificado por 1 personas con un promedio de 9.5. Este manual está disponible en los siguientes idiomas: Inglés. ¿Tiene alguna pregunta sobre Lux LV21-005 o necesita ayuda? Haz tu pregunta aquí

Especificaciones de Lux LV21-005

General
Marca Lux
Modelo LV21-005
Producto Termostato
Idioma Inglés
Tipo de archivo PDF