Metapace L-3

Metapace L-3 manual

  • Thermal Printers
    FCC Notice
    This device complies with Part 15 of the FCC Rules.Operation is subject to
    the following two conditions: (1) this device may not cause harmful interfe-
    rence, and (2) this device must accept any interference received, including
    interference that may cause undesired operation.
    This equipment may generate, use and/or radiate radio frequency energy.
    If not installed and used in full accordance with this instruction manual, in-
    terference to radio communications may occur. This equipment complies
    with the limits for a Class A Information Technology Equipment pursu-
    ant to Part 15 of the FCC Rules, which are designed to provide reasona-
    ble protection against such interference when operated in a commercial
    environment. Operation of this equipment in a residential area may also cau-
    se interference. In such case the user will be required, at his own expense, to
    correct the interference using whatever means necessary.
    ARM is a registered trademark of Advanced RISC Machines Ltd.
    Centronics is a registered trademark of Centronics Data Computer Corporation.
    Microsoft, Windows are registered trademarks of Microsoft Corporation.
    METAPACE is a registered trademark of Metapace.
    PS/2 is a registered trademark of International Business Machines Corporation.
    © 2008 by Metapace. All rights reserved. Under thecopyright laws, this ma-
    nual cannot be reproduced in any form without the prior written permission
    of Metapace. No patent liability is assumed, with respect to the use of the
    information contained herein.
    This manual has been validated and reviewed for accuracy. The instruc-
    tions and descriptions it contains are accurate for the Metapace L-3 Label
    Printer at the time of this manual’s printing. However, succeeding printers
    and manuals are subject to change without notice. Metapace assumes no
    liability for damages incurred directly or indirectly from errors, omissions
    or discrepancies between the printer and this manual.
    Although this manual describes and details many issues, which could pos-
    sibly occur, the manufacturer cannot warrant against unpredictable con-
    ditions during the printing process. For problems such as the printer not
    working, lost or unclear print content, etc., the manufacturer and resellers
    are responsible for correcting these issues (according to Metapace Prin-
    ter Warranty Clauses). In no event shall the manufacturer or the resellers
    involved be liable for any damages whatsoever (including without limita-
    tion; damages for loss of business profits, business interruption, loss of
    business information, or other pecuniary loss) arising from the use of, the
    results of use or inability to use this product, even if the manufacturer has
    been advised of the possibility of such damages.
    Label Printers
    Bar Code Scanners
Metapace L-3

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre Metapace L-3 o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Metapace L-3 responder adecuadamente a su pregunta.

Vea el manual de Metapace L-3 aquí, de forma gratuita. Este manual pertenece a la categoría Impresoras de etiquetas y ha sido calificado por 1 personas con un promedio de 7.5. Este manual está disponible en los siguientes idiomas: Inglés. ¿Tiene alguna pregunta sobre Metapace L-3 o necesita ayuda? Haz tu pregunta aquí

Especificaciones de Metapace L-3

Marca Metapace
Modelo L-3
Producto Impresora de etiquetas
Idioma Inglés
Tipo de archivo PDF
Velocidad de la impresión
Velocidad de impresión 254 mm/s
Pantalla LCD
Puertos e Interfaces
Cantidad de puertos USB 1.1 1
RS-232 Si
Memoria interna 8 MB
Memoria Flash 4 MB
Peso y dimensiones
Peso 15000 g
Otras características
Dimensiones (Ancho x Profundidad x Altura) 286 x 448 x 280 mm
Tipo de fuente de alimentación Corriente alterna
Emulaciones EPL, ZPL
Dirección de papel
Máximo diámetro del rollo 203 mm
Grosor de medios 0.06 - 0.305 mm
Ancho de papel soportado 118 mm
Condiciones ambientales
Intervalo de humedad relativa para funcionamiento 5 - 85 %
Rango de temperatura de funcionamiento 32 - 104 °F
Intervalo de temperatura operativa 0 - 40 °C

Preguntas frecuentes

A continuación, encontrarás las preguntas más frecuentes sobre el Metapace L-3 .

¿Tu pregunta no está en la lista? Haz tu pregunta aquí