Moxa NPort 5450I

Moxa NPort 5450I manual

(1)
  • P/N: 1802054000312
    NPort 5400 Series Quick
    Installation Guide
    Sixth Edition, January 2011
    1. Overview
    Welcome to Moxa NPort 5400, a 4 port communication device that
    allows you to control RS-232 (for NPort 5410), RS-422/485 (for
    NPort 5430/5430I) or RS-232/422/485 (for NPort 5450/5450I)
    serial devices over a TCP/IP based Ethernet. Besides, NPort
    5450-T and NPort 5450I-T are designed to use in wide
    temperature environment.
    NPort 5400 Series is a Moxa Green Product. Moxa’s Green Products
    satisfy the RoHS directive of the European Parliament, and
    accordingly, do not contain cadmium and cadmium compounds,
    hexavalent chromium compounds, lead and lead compounds,
    mercury and mercury compounds, PBBs (polybrominated
    biphenyls), or PBDEs (polybrominated diphenyl ethers).
    2. Package Checklist
    Before installing NPort 5400, verify that the package contains the
    following items:
    1 NPort 5400 4-port Serial Device Server
    Power Adaptor (NPort 5450-T and 5450I-T do not include this
    accessory)
    Power jack to 3-pin terminal block adaptor
    Wall mount kit
    Documentation and software CD
    Quick Installation Guide
    Warranty card
    Optional Accessories
    DK-35A For 35 mm DIN-Rail; includes 4 screws
    Notify your sales representative if any of the above items is missing or
    damaged.
    3. Hardware Introduction
    As shown in the following figures, NPort 5410 has 4 Male DB9 ports,
    for the RS-232 interface, NPort 5430/5430I has 4 5-pin terminal
    blocks, for the RS-422/485 interface, and NPort 5450/5450I has 4
    Male DB9 ports, for the RS-232/422/485 interface.
    NPort 5410/5450/5450I
    RJ45 10/100 Mbps Ethernet port
    Power Jack Power Input
    Terminal Block power input
    RESET
    LCM display panelIndicator LEDs Input buttons
    Male DB9 serial port
    Serial Device Server
    5410
    NP5410_61405
    192.168.127.254
    LAN
    V+ V-
    Port 1
    RS-422/785
    Port 2
    RS-422/785
    Port 3
    RS-422/785
    Port 4
    RS-422/785
    NPort 5430/5430I
    RJ45 10/100 Mbps Ethernet port
    Terminal Block power input
    RESET
    LC
    Power Jack Power Input
    M display panelIndicator LEDs Input buttons
    Serial Device Server
    5430
    NP 5410_61405
    192.168.127.254
    LAN
    V+ V-
    RS-422/485 Terminal Block
    T+ T- R+
    D+
    R-
    D-
    GND T+ T- R+
    D+
    R-
    D-
    GND T+ T- R+
    D+
    R-
    D-
    GND T+ T- R+
    D+
    R-
    D-
    GND
    Port 1
    RS-422/785
    Port 2
    RS-422/785
    Port 3
    RS-422/785
    Port 4
    RS-422/785
    NPort 5450-T/5450I-T
    RJ45 10/100 Mbps Ethernet port
    Terminal Block power input
    RESET
    Indicator LEDs
    Power Jack Power Input
    Male DB9 serial port
    Serial Device Server
    5450
    LAN
    V+ V-
    Port 1
    RS-422/785
    Port 2
    RS-422/785
    Port 3
    RS-422/785
    Port 4
    RS-422/785
    Reset ButtonPress the Reset button continuously for 5 sec to
    load factory defaults: Use a pointed object, such as a straightened
    paper clip or toothpick, to press the reset button. This will cause
    the Ready LED to blink on and off. The factory defaults will be
    loaded once the Ready LED stops blinking (after about 5 seconds).
    At this point, you should release the reset button.
    LED Indicators—NPort 5400’s top panel contains six LED
    indicators, as described in the following table.
    LED
    Name
    LED Color
    LED Function
    red Steady on: Power is on and NPort is
    booting up.
    Blinking: Indicates an IP conflict, or
    DHCP or BOOTP server did not respond
    properly.
    green Steady on: Power is on and NPort is
    functioning normally.
    Blinking: The NPort has been located
    by NPort Administrator’s Location function
    Ready
    off Power is off, or power error condition
    exists.
    orange 10 Mbps Ethernet connection.
    green 100 Mbps Ethernet connection.
    Ethernet
    off Ethernet cable is disconnected, or has a
    short.
    orange Serial port is receiving data.
    green Serial port is transmitting data.
    P1, P2,
    P3, P4
    off No data is being transmitted or received
    through the serial port.
    LCM Display Panel (not support in -T model)—When the NPort
    5400 unit is powered up, you will a see a display similar to:
    N
    P 5
    4
    1
    0
    _
    6
    1
    4
    0 5
    1 9 2
    . 1
    6
    8
    . 1
    2
    7 . 2 5 4
    This is where NP5410_61405 is the server’s name, and
    192.168.127.254 is the server’s IP address.
    LCM Panel Operation (not support in -T model)—There are
    four buttons on NPort 5400’s top panel used to operate the
    server’s LCM panel. Going from left to right, the buttons are:
    Button Action
    MENU Activates the main menu, or returns to a lower level.
    Scrolls up through a list of items shown on the LCM
    panel’s second line.
    Scrolls down through a list of items shown on the LCM
    panel’s second line.
    SEL Selects the option listed on the LCM panel’s second
    line.
    Detailed LCM Panel Operating instructions can be found on the
    CD-ROM in the “NPort 5400 Series User’s Manual.”
    – 1 – – 2 – – 3 –
Moxa NPort 5450I

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre Moxa NPort 5450I o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Moxa NPort 5450I responder adecuadamente a su pregunta.

Vea el manual de Moxa NPort 5450I aquí, de forma gratuita. Este manual pertenece a la categoría Servidores y ha sido calificado por 1 personas con un promedio de 7.5. Este manual está disponible en los siguientes idiomas: Engels. ¿Tiene alguna pregunta sobre Moxa NPort 5450I o necesita ayuda? Haz tu pregunta aquí

Especificaciones de Moxa NPort 5450I

General
Marca Moxa
Modelo NPort 5450I
Producto servidor
Idioma Engels
Tipo de archivo PDF
Detalles técnicos
Puerto serial 4
Pantalla LCD
Tipo de serie de interfaz RS-232/422/485
Aislamiento 2 kV
Voltaje de protección contra sobretensión 2 kV
Ethernet LAN, velocidad de transferencia de datos 10,100 Mbit/s
Puertos e Interfaces
Ethernet LAN (RJ-45) cantidad de puertos 1
Peso y dimensiones
Peso 740 g
Protocolos
Protocolos de red compatibles ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, HTTP, SMTP, SNTP, Rtelnet, ARP
Características de administración
Protocolos de gestión SNMP v1
Indicación
LEDs de conectividad Si
Condiciones ambientales
Intervalo de temperatura operativa 0 - 55 °C
Intervalo de temperatura de almacenaje -20 - 70 °C
Intervalo de humedad relativa para funcionamiento 5 - 95 %
Control de energía
Voltaje de entrada 12 - 48 V
Diseño
Seguridad UL (UL60950-1), CUL, TÜV (EN60950-1)
Certificación CE, FCC

ManualPDF.es

¿Busca un manual? ManualPDF.es asegura que encontrará el manual que está buscando en un abrir y cerrar de ojos. Nuestra base de datos contiene más de 1 millón de manuales en PDF de más de 10.000 marcas. Cada día añadimos los últimos manuales para que siempre encuentres el producto que buscas. Es muy sencillo: simplemente escriba el nombre de la marca y el tipo de producto en la barra de búsqueda y podrá ver instantáneamente el manual de su elección en línea de forma gratuita.

ManualPDF.es

© Copyright 2021 ManualPDF.es. Todos los derechos reservados.

Utilizamos cookies para asegurar que damos la mejor experiencia al usuario en nuestro sitio web. Si continúa utilizando este sitio asumiremos que está de acuerdo.

Leer más