NPort IA device servers deliver easy and reliable serial-to-Ethernet
connectivity for the industrial automation market. The servers support
several operation modes—TCP Server, TCP Client, UDP, Real COM,
Pair Connection, and Ethernet Modem—ensuring the compatibility of
network software, and are an ideal choice for connecting
RS-232/422/485 serial devices, such as PLCs, sensors, meters, motors,
drives, barcode readers, and operator displays. NPort IA device servers
come with a compact and rugged DIN-Rail mountable casing.
2. Package Checklist
Before installing NPort IA device servers, verify that the package
contains the following items:
•1 NPort IA Series Device Server
•Documentation and Software CD
yNPort IA Series Quick Installation Guide
Optional Accessories
yDR-4524
45W/2A DIN-Rail 24 VDC Power Supply with
universal 85 to 264 VAC input
yDR-75-24
75W/3.2A DIN-Rail 24 VDC Power Supply
with universal 85 to 264 VAC input
yDR-120-24
120W/5A DIN-Rail 24 VDC Power Supply with
88 to 132 VAC/176 to 264 VAC input by switch
Notify your sales representative if any of the above items is missing or
damaged.
3. Hardware Introduction
NPort IA device servers are used to control RS-232/422/485 devices
for industrial automation environments. Six of the models have 1
RS-232/422/485 serial port. NPort IA5150, NPort IA5150I, NPort
IA5150-M-SC, NPort IA5150I-M-SC, NPort IA5150-S-SC, and NPort
IA5150I-S-SC have 1 male DB9 port for the RS-232 interface, and a
5-pin terminal block for the RS-422/485 interface (only one port can be
used at a time). One model has 2 RS-232/422/485 serial ports. NPort
IA5250 has two male DB9 ports for all interfaces.
NPort IA5150 Series Appearance
Reset
Top ViewBottom ViewFront View
Reset
V1
V1+
V2
V2+
1
Dual power input
and relay output
PWR1
PWR2
RDY
P1
FX
IA
5150-M-SC
Fiber optic
Ethernet
RS-232RS-422/485
P1
RS-232
RS-422/485
LED
Indicators
NPort IA5250 Appearance
PWR1
PWR2
RDY
P1
Ethernet 1
Ethernet 2
Reset
5250
IA
P2
Copper
Ethernet
LED
Indicators
Top ViewBottom ViewFront View
Reset
V1
V1+
V2
V2+
1
Dual power input
and relay output
RS-232/422/485
RS-232/422/485P1P2
Reset Button—Press the Reset button continuously for 5 sec to load
factory defaults: Use a pointed object, such as a straightened paper clip or
toothpick, to press the reset button. This will cause the Ready LED to
blink on and off. The factory defaults will be loaded once the Ready LED
stops blinking (after about 5 seconds). At this point, you should release
the reset button.
NPort IA LED Indicators (front panel)
Name ColorFunction
PWR1,
PWR2
red
Power is being supplied to power input PWR1,
PWR2.
red
Steady on: Power is on and NPort IA is booting
up.
Blinking: Indicates an IP conflict, the DHCP
or BOOTP server did not respond
properly, or a relay output occurred.
green
Steady on: Power is on and NPort IA is
functioning normally.
Blinking: The device server has been located
by Administrator’s Location
function.
Ready
off Power is off, or a power error condition exists.
Orange10 Mbps Ethernet connection.
Green100 Mbps Ethernet connection.
Ethernet
off Ethernet cable is disconnected, or has a short.
orange
Serial port is receiving data.
green
Serial port is transmitting data.
P1, P2
off
No data is being transmitted or received through
the serial port.
FX
orange
Steady on: Ethernet fiber connection, but port is
idle.
Blinking: Fiber port is transmitting or
receiving data.
4. Hardware Installation Procedure
STEP 1: After removing NPort IA from the box, the first thing you
should do is connect the power adaptor. Connect the 12-48
VDC power line with NPort IA’s terminal block, or connect
the DIN-Rail power supply with NPort IA’s terminal block.
STEP 2: Connect NPort IA to a network. Use a standard
straight-through Ethernet cable to connect to a Hub or
Switch. When setting up or testing NPort IA, you might find
it convenient to connect directly to your computer’s Ethernet
port. In this case, use a cross-over Ethernet cable.
STEP 3: Connect NPort IA’s serial port to a serial device.
STEP 4: NPort IA is designed to be attached to a DIN-Rail or
mounted on a wall. The two sliders on NPort IA’s rear panel
serve a dual purpose. For wall mounting, both sliders should
be extended. For DIN-Rail mounting, start with one slider
pushed in, and the other slider extended. After placing the
NPort IA on the DIN-Rail, push the extended slider in to
lock the device server to the rail. The two placement options
are illustrated in the accompanying figures.
P/N: 1802051500211
Whatsapp
Mail
Facebook
¿Necesita ayuda?
Número de preguntas: 0
¿Tiene alguna pregunta sobre Moxa NPort IA-5250 o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Moxa NPort IA-5250 responder adecuadamente a su pregunta.
Acerca de Moxa NPort IA-5250
Vea el manual de Moxa NPort IA-5250 aquí, de forma gratuita. Este manual pertenece a la categoría Servidores y ha sido calificado por 1 personas con un promedio de 9.1. Este manual está disponible en los siguientes idiomas: Engels. ¿Tiene alguna pregunta sobre Moxa NPort IA-5250 o necesita ayuda? Haz tu pregunta aquí
Utilizamos cookies para asegurar que damos la mejor experiencia al usuario en nuestro sitio web. Si continúa utilizando este sitio asumiremos que está de acuerdo.
— 1 — — 2 — — 3 —NPort IA5150/5250 SeriesQuick Installation GuideFourth Edition, September 20081. OverviewNPort IA device servers deliver easy and reliable serial-to-Ethernetconnectivity for the industrial automation market. The servers supportseveral operation modes—TCP Server, TCP Client, UDP, Real COM,Pair Connection, and Ethernet Modem—ensuring the compatibility ofnetwork software, and are an ideal choice for connectingRS-232/422/485 serial devices, such as PLCs, sensors, meters, motors,drives, barcode readers, and operator displays. NPort IA device serverscome with a compact and rugged DIN-Rail mountable casing.2. Package ChecklistBefore installing NPort IA device servers, verify that the packagecontains the following items:• 1 NPort IA Series Device Server• Documentation and Software CDy NPort IA Series Quick Installation GuideOptional Accessoriesy DR-452445W/2A DIN-Rail 24 VDC Power Supply withuniversal 85 to 264 VAC inputy DR-75-2475W/3.2A DIN-Rail 24 VDC Power Supplywith universal 85 to 264 VAC inputy DR-120-24120W/5A DIN-Rail 24 VDC Power Supply with88 to 132 VAC/176 to 264 VAC input by switchNotify your sales representative if any of the above items is missing ordamaged.3. Hardware IntroductionNPort IA device servers are used to control RS-232/422/485 devicesfor industrial automation environments. Six of the models have 1RS-232/422/485 serial port. NPort IA5150, NPort IA5150I, NPortIA5150-M-SC, NPort IA5150I-M-SC, NPort IA5150-S-SC, and NPortIA5150I-S-SC have 1 male DB9 port for the RS-232 interface, and a5-pin terminal block for the RS-422/485 interface (only one port can beused at a time). One model has 2 RS-232/422/485 serial ports. NPortIA5250 has two male DB9 ports for all interfaces.NPort IA5150 Series AppearanceResetTop View Bottom ViewFront ViewResetV1V1+V2V2+1Dual power inputand relay outputPWR1PWR2RDYP1FXIA5150-M-SCFiber opticEthernetRS-232 RS-422/485P1RS-232RS-422/485LEDIndicatorsNPort IA5250 AppearancePWR1PWR2RDYP1Ethernet 1Ethernet 2Reset5250IAP2CopperEthernetLEDIndicatorsTop View Bottom ViewFront ViewResetV1V1+V2V2+1Dual power inputand relay outputRS-232/422/485RS-232/422/485P1 P2Reset Button—Press the Reset button continuously for 5 sec to loadfactory defaults: Use a pointed object, such as a straightened paper clip ortoothpick, to press the reset button. This will cause the Ready LED toblink on and off. The factory defaults will be loaded once the Ready LEDstops blinking (after about 5 seconds). At this point, you should releasethe reset button.NPort IA LED Indicators (front panel)Name Color FunctionPWR1,PWR2redPower is being supplied to power input PWR1,PWR2.redSteady on: Power is on and NPort IA is bootingup.Blinking: Indicates an IP conflict, the DHCPor BOOTP server did not respondproperly, or a relay output occurred.greenSteady on: Power is on and NPort IA isfunctioning normally.Blinking: The device server has been locatedby Administrator’s Locationfunction.Readyoff Power is off, or a power error condition exists.Orange 10 Mbps Ethernet connection.Green 100 Mbps Ethernet connection.Ethernetoff Ethernet cable is disconnected, or has a short.orangeSerial port is receiving data.greenSerial port is transmitting data.P1, P2offNo data is being transmitted or received throughthe serial port.FXorangeSteady on: Ethernet fiber connection, but port isidle.Blinking: Fiber port is transmitting orreceiving data.4. Hardware Installation ProcedureSTEP 1: After removing NPort IA from the box, the first thing youshould do is connect the power adaptor. Connect the 12-48VDC power line with NPort IA’s terminal block, or connectthe DIN-Rail power supply with NPort IA’s terminal block.STEP 2: Connect NPort IA to a network. Use a standardstraight-through Ethernet cable to connect to a Hub orSwitch. When setting up or testing NPort IA, you might findit convenient to connect directly to your computer’s Ethernetport. In this case, use a cross-over Ethernet cable.STEP 3: Connect NPort IA’s serial port to a serial device.STEP 4: NPort IA is designed to be attached to a DIN-Rail ormounted on a wall. The two sliders on NPort IA’s rear panelserve a dual purpose. For wall mounting, both sliders shouldbe extended. For DIN-Rail mounting, start with one sliderpushed in, and the other slider extended. After placing theNPort IA on the DIN-Rail, push the extended slider in tolock the device server to the rail. The two placement optionsare illustrated in the accompanying figures.P/N: 1802051500211
