Moxa NPort IA-5250I

Moxa NPort IA-5250I manual

(1)
  • — 1 — — 2 — — 3 —
    NPort IA5250I/5250I-T Series
    Quick Installation Guide
    First Edition, October 2009
    1. Overview
    NPort IA device servers deliver easy and reliable serial-to-Ethernet
    connectivity for the industrial automation market. The servers support
    several operation modes—TCP Server, TCP Client, UDP, Real COM,
    Pair Connection, and Ethernet Modem—ensuring the compatibility of
    network software, and are an ideal choice for connecting
    RS-232/422/485 serial devices, such as PLCs, sensors, meters, motors,
    drives, barcode readers, and operator displays. NPort IA5250I/5250I-T
    device servers come with a compact and rugged DIN-Rail mountable
    casing.
    2. Package Checklist
    Before installing NPort IA device servers, verify that the package
    contains the following items:
    1 NPort IA Series Device Server
    Documentation and Software CD
    NPort IA Series Quick Installation Guide
    Optional Accessories
    y DR-4524
    45W/2A DIN-Rail 24 VDC Power Supply with
    universal 85 to 264 VAC input
    y DR-75-24
    75W/3.2A DIN-Rail 24 VDC Power Supply with
    universal 85 to 264 VAC input
    y DR-120-24
    120W/5A DIN-Rail 24 VDC Power Supply with 88
    to 132 VAC/176 to 264 VAC input by switch
    Notify your sales representative if any of the above items is missing or
    damaged.
    3. Hardware Introduction
    NPort IA5250I/5250I-T device servers are used to control
    RS-232/422/485 devices for industrial automation environments. NPort
    5250I/5250I-T has 2 RS-232/422/485 male DB9 serial ports with 2KV
    isolation for all interfaces.
    NPort IA5250I/5250I-T Appearance
    PWR1
    PWR2
    RDY
    P1
    Ethernet 1
    Ethernet 2
    Reset
    5250
    IA
    P2
    Copper
    Ethernet
    LED
    Indicators
    Top View Bottom ViewFront View
    Reset
    V1
    V1+
    V2
    V2+
    1
    Dual power input
    and relay output
    RS-232/422/485
    RS-232/422/485P1 P2
    I
    Reset ButtonPress the Reset button continuously for 5 sec to load
    factory defaults: Use a pointed object, such as a straightened paper clip or
    toothpick, to press the reset button. This will cause the Ready LED to
    blink on and off. The factory defaults will be loaded once the Ready LED
    stops blinking (after about 5 seconds). At this point, you should release
    the reset button.
    NPort IA LED Indicators (front panel)
    Name Color Function
    PWR1,
    PWR2
    red
    Power is being supplied to power input PWR1,
    PWR2.
    red
    Steady on: Power is on and NPort IA is booting
    up.
    Blinking: Indicates an IP conflict, the DHCP
    or BOOTP server did not respond
    properly, or a relay output occurred.
    green
    Steady on: Power is on and NPort IA is
    functioning normally.
    Blinking: The device server has been located
    by Administrator’s Location
    function.
    Ready
    off Power is off, or a power error condition exists.
    Orange 10 Mbps Ethernet connection.
    Green 100 Mbps Ethernet connection.
    Ethernet
    off Ethernet cable is disconnected, or has a short.
    orange
    Serial port is receiving data.
    green
    Serial port is transmitting data.
    P1, P2
    off
    No data is being transmitted or received through
    the serial port.
    4. Hardware Installation Procedure
    STEP 1: After removing NPort IA from the box, the first thing you
    should do is connect the power adaptor. Connect the 12-48
    VDC power line with NPort IAs terminal block, or connect
    the DIN-Rail power supply with NPort IAs terminal block.
    STEP 2: Connect NPort IA to a network. Use a standard
    straight-through Ethernet cable to connect to a Hub or
    Switch. When setting up or testing NPort IA, you might find
    it convenient to connect directly to your computer’s Ethernet
    port. In this case, use a cross-over Ethernet cable.
    STEP 3: Connect NPort IAs serial port to a serial device.
    STEP 4: NPort IA is designed to be attached to a DIN-Rail or
    mounted on a wall. The two sliders on NPort IAs rear panel
    serve a dual purpose. For wall mounting, both sliders should
    be extended. For DIN-Rail mounting, start with one slider
    pushed in, and the other slider extended. After placing the
    NPort IA on the DIN-Rail, push the extended slider in to
    lock the device server to the rail. The two placement options
    are illustrated in the accompanying figures.
    Wall Mount DIN-Rail
    Push here to lock
    to the DIN-Rail
    5. Software Installation Information
    To install NPort Administration Suite, insert the Document &
    Software CD into your computers CD-ROM drive. Once the
    installation window opens, click on the Installation Administration
    Suite button, and then follow the instructions on the screen. To view
    detailed information about NPort IA Administration Suite, click on
    the Documents button, and then select NPort IA5250I/5250I-T Series
    Users Manual to open the pdf version of this user’s manual.
    P/N: 1802051500212
Moxa NPort IA-5250I

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre Moxa NPort IA-5250I o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Moxa NPort IA-5250I responder adecuadamente a su pregunta.

Vea el manual de Moxa NPort IA-5250I aquí, de forma gratuita. Este manual pertenece a la categoría Servidores y ha sido calificado por 1 personas con un promedio de 7.9. Este manual está disponible en los siguientes idiomas: Engels. ¿Tiene alguna pregunta sobre Moxa NPort IA-5250I o necesita ayuda? Haz tu pregunta aquí

Especificaciones de Moxa NPort IA-5250I

General
Marca Moxa
Modelo NPort IA-5250I
Producto servidor
Idioma Engels
Tipo de archivo PDF
Detalles técnicos
Puerto serial 2
Tipo de serie de interfaz RS-232/422/485
Aislamiento 2 kV
Peso y dimensiones
Dimensiones (Ancho x Profundidad x Altura) 29 x 89.2 x 118.5 mm
Peso 380 g
Protocolos
Protocolos de red compatibles ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP V1, HTTP, SNTP
Condiciones ambientales
Intervalo de temperatura operativa 0 - 55 °C
Intervalo de temperatura de almacenaje -40 - 85 °C
Intervalo de humedad relativa para funcionamiento 5 - 95 %
Características de administración
Protocolos de gestión SNMP v1
Indicación
Indicadores LED Si
Link / Act LED Si
Diseño
Seguridad UL (UL60950-1), UL508, TÜV (EN60950-1)
Certificación CE, FCC
Otras características
Sistemas operativos compatibles Windows 95, 98, ME, NT, 2000, XP, 2003, Vista, XP x64, 2003 x64, Vista x64\r\nSCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i\r\nLinux kernel 2.4.x, 2.6.x

ManualPDF.es

¿Busca un manual? ManualPDF.es asegura que encontrará el manual que está buscando en un abrir y cerrar de ojos. Nuestra base de datos contiene más de 1 millón de manuales en PDF de más de 10.000 marcas. Cada día añadimos los últimos manuales para que siempre encuentres el producto que buscas. Es muy sencillo: simplemente escriba el nombre de la marca y el tipo de producto en la barra de búsqueda y podrá ver instantáneamente el manual de su elección en línea de forma gratuita.

ManualPDF.es

© Copyright 2021 ManualPDF.es. Todos los derechos reservados.

Utilizamos cookies para asegurar que damos la mejor experiencia al usuario en nuestro sitio web. Si continúa utilizando este sitio asumiremos que está de acuerdo.

Leer más