Netgear WN802T

Netgear WN802T manual

(1)
  • )NSTALLATION'UIDE
    NETGEAR RangeMax™ NEXT Wireless-N Access Point WN802T
    Start Here
    Follow these instructions to set up your wireless-N access point. You can also consult the
    documentation links on the Resource CD or the NETGEAR knowledge base at
    http://kbserver.netgear.com. Please consult the Resource CD or the Documentation link on
    the user interface to access the NETGEAR RangeMax NEXT Wireless-N Access Point
    WN802T Reference Manual for instructions on advanced configuration options.
    Estimated Completion Time: 20 minutes.
    Tip: Before mounting the WN802T Wireless-N Access Point in a high location, first set
    up and test the WN802T to verify wireless network connectivity.
    First, Set Up the WN802T
    1. CONNECT THE WIRELESS-N ACCESS POINT TO YOUR COMPUTER
    a. Unpack the box and verify the contents.
    b. Prepare a computer with Internet access and an Ethernet adapter. If this computer
    is already part of your network, record its TCP/IP configuration settings.
    Configure the computer with a static IP address of 192.168.0.210 and
    255.255.255.0 as the Subnet Mask.
    c. Connect an Ethernet cable from the
    WN802T to the PC.
    d. Securely insert the other end of the cable
    into the WN802T Ethernet port.
    e. Connect the NETGEAR Switching
    Power Supply from the wireless-N
    access point to an AC power outlet.
    Note: Only connect your wireless-N
    access point using the switching power
    supply provided with the WN802T.
    f. Check the lights on the front of the wireless-N access point:
    Power: The green power light should be
    lit. If the power light is not lit, check the
    connections and check to see if the power
    outlet is controlled by a wall switch that is
    turned off.
    Ethernet: The Ethernet (LAN) light
    should be lit (amber for 10/100 Mbps and green
    for 1000 Mbps) indicating that a connection
    has been made. If not, make sure the Ethernet
    cable is securely attached at both ends.
    WLAN: The blue wireless light should
    be lit and blinking indicating that it is sending a
    signal.
    2. CONFIGURE LAN AND WIRELESS ACCESS
    a. Configure the WN802T Ethernet port for LAN access.Connect to the WN802T
    by opening your browser and entering http://192.168.0.233 in the address field.
    A login window will display.
    b. When prompted, enter
    admin for the
    user name and
    password for the
    password, both in lower case letters.
    The NETGEAR RangeMax™
    NEXT Wireless-N Access Point
    WN802T user interface will display.
    c. Select Wireless Settings under the
    Setup menu on the left navigation pane and configure your wireless interface for
    wireless access.
    d. Then select WEP/WPA Settings under Security and configure the level of data
    encryption security for your network.
    See the online help or the online Reference Manual for full instructions.
    http://192.168.0.233
    e. Finally, select Basic Settings under the Setup menu on the left navigation pane
    and configure the IP Settings for your network.
    Note: If you change the default subnet of the LAN IP address, you will be
    disconnected from the WN802T Wireless-N Access Point user interface. To
    reconnect, reconfigure your computer with a static IP address within the new
    LAN IP subnet.
    Tip: Before you deploy your wireless-N access point, reserve an IP address
    (based on the WN802T’s MAC address) on the DHCP server. That way, you can
    configure the wireless-N access point with a static IP address which you can
    always use to log in to make future configuration changes.
    3. TEST WIRELESS CONNECTIVITY
    Using a computer with a wireless adapter configured according to the wireless
    settings you just set in the WN802T, establish a wireless connection to the WN802T.
    Deploy the WN802T
    Now that you have finished the setup steps, you are ready to deploy the WN802T in your
    network. If needed, you can now reconfigure the PC you used in step 1 back to its original
    TCP/IP settings.
    Warning: To allow for proper ventilation, always install the unit vertically using the
    included stand. Do not lay the unit flat.
    1. Disconnect the WN802T from the computer and place it where you will deploy it.
    The best location is elevated, such as wall mounted or on the top of a cubicle, at the
    center of your wireless coverage area, and within line of sight of all the mobile
    devices. The WN802T should be positioned vertically.
    2. Connect an Ethernet cable from your WN802T wireless-N access point to a LAN port
    on your router, switch, or hub.
    3. Connect the power adapter to the wireless-N access point and plug the power adapter
    in to a power outlet. The Power, WLAN and Ethernet lights should light up.
    Note: A wall mount kit is included with theWN802T. Instructions for installing the
    brackets and mounting the WN802Tare in the online NETGEAR RangeMax NEXT
    Wireless-N Access Point WN802T Reference Manual.
Netgear WN802T

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre Netgear WN802T o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Netgear WN802T responder adecuadamente a su pregunta.

Vea el manual de Netgear WN802T aquí, de forma gratuita. Este manual pertenece a la categoría Puntos de acceso y ha sido calificado por 1 personas con un promedio de 7.1. Este manual está disponible en los siguientes idiomas: Inglés. ¿Tiene alguna pregunta sobre Netgear WN802T o necesita ayuda? Haz tu pregunta aquí

Especificaciones de Netgear WN802T

General
Marca Netgear
Modelo WN802T
Producto Punto de acceso
EAN 606449065206
Idioma Inglés
Tipo de archivo PDF
Características
Rango máximo de transferencia de datos 300Mbit/s
Peso y dimensiones
Dimensiones (Ancho x Profundidad x Altura) 225.5 x 172 x 39mm
Peso 560g
Seguridad
MAC, filtro de direcciones
Desempeño
Requisitos mínimos del sistema -Internet Explorer 6.0;
-4 GHz 802.11n / 2.4 GHz 802.11 b/ g;
Sistemas operativos compatibles Microsoft Windows 98, Me, 2000, XP, Mac OS, UNIX, / Linux

ManualPDF.es

¿Busca un manual? ManualPDF.es asegura que encontrará el manual que está buscando en un abrir y cerrar de ojos. Nuestra base de datos contiene más de 1 millón de manuales en PDF de más de 10.000 marcas. Cada día añadimos los últimos manuales para que siempre encuentres el producto que buscas. Es muy sencillo: simplemente escriba el nombre de la marca y el tipo de producto en la barra de búsqueda y podrá ver instantáneamente el manual de su elección en línea de forma gratuita.

ManualPDF.es

© Copyright 2020 ManualPDF.es. Todos los derechos reservados.

Utilizamos cookies para asegurar que damos la mejor experiencia al usuario en nuestro sitio web. Si continúa utilizando este sitio asumiremos que está de acuerdo.

Leer más