Name: Omnitronic PA Volume Controller
Brand: Omnitronic
SKU: 1681246
Rating: 76 (1 reviews)

manualOmnitronic PA Volume Controller

PA Volume ControllerSafety Instructions

with 24 V Emergency Priority Relay

The volume controller was designed for use in 100 V PA systems. It offers eleven switching positions and

is equipped with an emergency priority relay. The maximum nominal load by the following speakers or by

the following speaker group must not be exceeded. The volume controller must be installed into a

customary flush socket or into an optional surface socket.

Audio transformer for 100 V line technique

Attenuation in 11 steps

Flush mounting in customary 60 mm wall sockets

Surface mounting with optional PA SF housing

Mounting depth: 45 mm

Screw plug connection

Multiple power ratings and colors available

Before your initial start-up, please make sure that there are no transport damages. Should there be

any, do not take the device into operation and immediately consult your dealer.

Operate the device only after having familiarized with its functions. Do not permit operation by

persons not qualified for operating the device.

This product was designed for indoor use only. Protect the device against humidity and heat. The

ambient temperature must always be between 0° C and 40° C. Keep away from heaters and other

heating sources!

Speaker cables are sensitive to electrical interference. Hence, it is recommended to lay them at a

distance of several meters to sources of interference (e.g. dimmers, light switches).

Maintenance and service operations are only to be carried out by authorized dealers. Damage,

caused by manual modifications on the device are not subject to warranty. If the device is used for

other purposes than originally intended or if it is not correctly connected, the product may suffer

damages and the guarantee becomes void.

For cleaning, please use a soft lint-free and moistened cloth. Never use alcohol or solvents!

www.omnitronic.com

00033856.DOC, Version 1.0

Nachdruck verboten!

Reproduction prohibited!

100 V PA TECHNIQUE

USER'S MANUAL

PA Volume Controller

Please note: Every information is subject to change without prior notice. 01.02.2008 ©

Electrical ConnectionTechnical Specifications

DANGER TO LIFE!

High voltage at terminals. Installation by skilled personnel only!

Cabling a PA system is an electric installation which must only be carried out by a qualified

electrician! Always insulate the connection cables which are not used. Pay attention to the correct

power matching. Overload will result in damage of the PA amplifier and of the volume controller.

If the PAsystem is turned on, turn it off before making any connection.

To facilitate handling, the terminals can be removed from their plug-in connections on the unit

and replaced after connection.

Connect the lines of the 100 V signal source to the positive and negative pole of the input “IN”.

Connect the PAspeaker to the positive and negative pole of the output “OUT”.

The emergency priority relay can be activated by a 24 V DC voltage

positive and negative pole of the By activating the

emergency priority relay important announcements can be heard via the PA speaker connected

even if the volume controller is set to minimum (left stop position).

Turn off PA system before

connecting.

. Connect the 24 V control lines

for activating the relay to the terminal “24V”.

80711011 .........................30 W

80711012.........................45 W

80711015.........................10 W

80711016.........................45 W

Frequency range:................50-18,000 Hz

Priority relay: ......................24 V DC

Dimensions: .......................80 x 80 x 67

Mounting depth: ..................45 mm

Weight: ..............................200 g

Rated power:

80711001.........................5 W

80711002.........................10 W

80711003.........................20 W

80711004.........................30 W

80711005.........................45 W

80711008.........................5 W

80711009.........................10 W

80711010.........................20 W

+24V- +OUT- +IN-

24 V DC voltage

Signal source

PA speaker connections

Vea el manual de Omnitronic PA Volume Controller aquí, de forma gratuita. Este manual pertenece a la categoría No categorizado y ha sido calificado por 1 personas con un promedio de 7.6. Este manual está disponible en los siguientes idiomas: Inglés. ¿Tiene alguna pregunta sobre Omnitronic PA Volume Controller o necesita ayuda? Haz tu pregunta aquí

¿Necesita ayuda?

¿Tienes alguna pregunta sobre el Omnitronic y no encuentras la respuesta en el manual? Haz tu pregunta aquí. Describe de forma clara y completa tu problema y haz tu pregunta. Cuanto mejor expliques el problema y formules tu pregunta, más fácil será para otros propietarios de dispositivos Omnitronic proporcionarte una respuesta útil.

Número de preguntas: 0

General

	Omnitronic
	PA Volume Controller
	No categorizado
	4026397260779
	Inglés
	Manual de usuario (PDF), Catálogo (PDF)

¿No encuentras la respuesta a tu pregunta en el manual? Puede que encuentres lo que buscas en la sección de preguntas frecuentes sobre el Omnitronic PA Volume Controller más abajo.

¿Tu pregunta no está en la lista? Haz tu pregunta aquí

No hay resultados