1
Distributor
10275
Rosemont,
4404.016.94271
Last update:
LivingColors / LightStr
0-14
01 02 03 05
Light
E N G L I S H
•
alwa
of the luminaire and k
•
maintenance or repair
• If in doubt,
alwa
luminaires should be installed by a quali ed electrician.
• Observe the
black or black tracer (Line),
bonding purpose.
• Do not connect
this xture in a non-gr
to carry electrical current if any wir
Under this condition,
shock which could cause injury or death.
•
CAUTION:
connections (if applicable).
• Be careful not to damage or cut the wir
permit wires to contact an
• Do not remov
and possible risk of re.
• Maintain interior lighting with a dry cloth duster
liquid on all electrical parts.
•
the identi cation label on the luminaire and the icons that ar
safety instructions.
A
icons respectiv
xture ar
01-
02- Only suitable for dry locations.
03-
04- Suitable for under
05- Philips LivingColors/LightStrips is based on ZigBee LightLink,
wireless communication within the home.
can be connected with other Philips ZigBee LightLink Certied products.
The Luminaire – as w
in accordance with the strictest national safety standar
or material damages,
stated on the packaging).
Most ballasts,
by separate ballast manufactur
caused to the luminaire in extr
envir
the purchase date and is only valid on pr
luminaire was not installed follo
manufacturer does not accept an
wrong application of the luminair
Alterations in design and technical specications reserved.
© Copyright Philips
1BDistributor10275 W. Higgins RoadRosemont, IL 60018, USA4404.016.94271Last update: 06/28/13LivingColors / LightStrips0-1401 02 03 0504LightE N G L I S H SAFETY INSTRUCTIONS - PART B• The manufacturer advises the correct use of Luminaires (lighting xtures)! Thereforealways follow these instructions to ensure correct and safe installation and functioningof the luminaire and keep it for future reference.• Turn off electrical power at main fuse or circuit breaker box before commencing installation,maintenance or repair.• If in doubt, consult a quali ed electrician or contact your retail outlet. Ensure that youalways install the luminiare to the local electrical code. Certain regulations indicate thatluminaires should be installed by a quali ed electrician.• Observe the correct color of the wiring before installation: white or white tracer (Neutral),black or black tracer (Line), green or bare copper wire (Ground) and green tracer forbonding purpose.• Do not connect this luminaire to a non-grounded electrical system. WARNING: Installingthis xture in a non-grounded electrical system could allow metal parts of the luminaireto carry electrical current if any wires or wire connections become broken or loose.Under this condition, anyone coming in contact with the luminaire is subject to electricshock which could cause injury or death.• Always use wire nuts/connectors rated for the correct gauge and number of wires used.CAUTION: Be certain that no bare wire strands are exposed outside of the wire nuts/connections (if applicable).• Be careful not to damage or cut the wire insulation (covering) during installation. Do notpermit wires to contact any sharp edges.• Do not remove thermal insulation pad(s). Doing so will result in increased temperaturesand possible risk of re.• Maintain interior lighting with a dry cloth duster, do not use abrasives or solvents. Avoidliquid on all electrical parts.• Always consider all the technical speci cations of the luminaire. Verify the stated icons onthe identi cation label on the luminaire and the icons that are shown in part A of yoursafety instructions.ATTENTION: Below you will nd all the explanations with numeric reference to theicons respectively in front of these PART-B safety instructions. Applicable icons to yourxture are shown in PART-A safety instructions.01- This luminaire should only be installed indoors.02- Only suitable for dry locations.03- This product is not suitable for children under 14 years.04- Suitable for under-cabinet mounting.05- Philips LivingColors/LightStrips is based on ZigBee LightLink, an open standard forwireless communication within the home. All Philips ZigBee LightLink Certied productscan be connected with other Philips ZigBee LightLink Certied products.The Luminaire – as well as all other products from the collection – is designed and testedin accordance with the strictest national safety standards. In case of construction faultsor material damages, the manufacturer gives a guarantee up to 2 year (unless otherwisestated on the packaging). Light bulbs and batteries do not fall under the guarantee terms.Most ballasts, transformers, electronic drivers and emergency battery packs are coveredby separate ballast manufacturer’s warranties, contact Philips for exceptions. Any damagecaused to the luminaire in extreme conditions (coastal areas, industrial surroundings, farmenvironments) will not be covered by the guarantee. The period of guarantee starts fromthe purchase date and is only valid on presentation of receipt. The guarantee is void if theluminaire was not installed following the instructions or repaired or modied. Themanufacturer does not accept any liability for damage caused as a result of misuse orwrong application of the luminaire.Alterations in design and technical specications reserved.© Copyright Philips