Pioneer ND-BC8

Pioneer ND-BC8 manual

(1)
  • PIONEER CORPORATION
    1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN
    PIONEER ELECTRONICS (USA) INC.
    P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
    TEL: (800) 421-1404
    PIONEER EUROPE NV
    Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
    TEL: (0) 3/570.05.11
    PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
    253 Alexandra Road, #04-01, Singapore 159936
    TEL: 65-6472-7555
    PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
    5 Arco Lane, Heatherton, Victoria, 3202 Australia
    TEL: (03) 9586-6300
    PIONEER ELECTRONICS OF CANADA, INC.
    340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada
    TEL: 1-877-283-5901
    TEL: 905-479-4411
    PIONEER ELECTRONICS DE MEXICO S.A. de C.V.
    Blvd. Manuel Avila Camacho 138 10 piso
    Col. Lomas de Chapultepec, Mexico, D.F. 11000
    TEL: 52-55-9178-4270, Fax: 52-55-5202-3714
    © 2015 PIONEER CORPORATION.
    All rights reserved.
    © 2015 PIONEER CORPORATION.
    Tous droits de reproduction et de traduction
    réservés.
    Printed in Japan
    Imprimé en Japon
    <CJ-E09S08R> EL< KFWZ15D >
    Owner’s Manual
    Mode d’emploi
    UNIVERSAL REAR-VIEW CAMERA
    CAMERA DE RECUL UNIVERSELLE
    ND-BC8
    1 Glass surface
    2 Make sure it doesn’t touch the wiper
    3 Install on the center part
    Fig. 1
    Abb. 1
    A Rear view camera × 1 B RCA power supply cable × 1 C Hexagon wrench × 1
    E Waterproof
    pad × 1
    D Clamp × 6 F Double-sided
    tape × 1
    Fig. 4
    Abb. 4
    Fig. 8
    Abb. 8
    Fig. 6
    Abb. 6
    2 Bumper or rear edge of car
    1 Camera
    stand
    Fig. 2
    Abb. 2
    Fig. 3
    Abb. 3
    This device complies with part 15 of the FCC
    Rules.
    Operation is subject to the following two
    conditions:
    (1) This device may not cause harmful interference,
    and (2) this device must accept any interference
    received, including interference that may cause
    undesired operation.
    Information to User
    Alteration or modifications carried out without
    appropriate authorization may invalidate the user’s
    right to operate the equipment.
    Note:
    This equipment has been tested and found to comply
    with the limits for a Class B digital device, pursuant
    to Part 15 of the FCC Rules. These limits are
    designed to provide reasonable protection against
    harmful interference in a residential installation.
    This equipment generates, uses and can radiate radio
    frequency energy and, if not installed and used in
    accordance with the instructions, may cause harmful
    interference to radio communications. However, there
    is no guarantee that interference will not occur in a
    particular installation. If this equipment does cause
    harmful interference to radio or television reception,
    which can be determined by turning the equipment
    off and on, the user is encouraged to try to correct
    the interference by one or more of the following
    measures:
    • Reorient or relocate the receiving antenna.
    Increase the separation between the equipment and
    receiver.
    Connect the equipment into an outlet on a circuit
    different from that to which the receiver is
    connected.
    • Consult the dealer or an experienced radio/TV
    technician for help.
    If you want to dispose this product, do not
    mix it with general household waste. There
    is a separate collection system for used elec-
    tronic products in accordance with legisla-
    tion that requires proper treatment, recovery
    and recycling.
    Private households in the member states of the EU,
    in Switzerland and Norway may return their used
    electronic products free of charge to designated col-
    lection facilities or to a retailer (if you purchase a
    similar new one). For countries not mentioned above,
    please contact your local authorities for the correct
    method of disposal. By doing so you will ensure that
    your disposed product undergoes the necessary treat-
    ment, recovery and recycling and thus prevent poten-
    tial negative effects on the environment and human
    health.
    WARNING:
    This product contains chemicals known to the State
    of California and other governmental entities to cause
    cancer and birth defects or other reproductive harm.
    Wash hands after handling.
    IMPORTANT
    SAFEGUARDS
    Installation and wiring of this product require spe-
    cialist skill and experience. To assure your safety,
    please request a specialist technician to install the
    unit.
    Do not attempt to heat the surface of the camera
    lens or camera lens itself with a lighter and so on
    when they have become frozen. This can cause a
    malfunction.
    This product is a rear view camera for checking
    the view at the rear of a car.
    A rear view camera is a camera that provides sym-
    metrical images in the same way as rear and side
    view mirrors.
    Connection to a TV with an RCA video input is
    possible, but confirm whether the TV you use has
    a reverse gear connection function.
    This product is designed to supplement the driver’s
    rear view, but the camera images do not show all
    dangers and obstacles. Be sure to look behind you
    when reversing to confirm the view.
    This product features a wide-angle lens, so the
    near view is wide and the far view is narrow,
    which may create a false sense of distance. Be
    sure to look behind you when reversing to confirm
    the view.
    Do not wash your car with an automatic car wash
    or high-pressure water as it may result in water
    entering the camera or the camera falling off.
    • Check camera stand installation before driving.
    – Are the screws loose?
    – Is the camera stand firmly secured?
    – If the rear view camera comes loose while you
    are driving it may cause an accident.
    This product by itself does not display guidelines.
    6 Be sure not to hide any part of the characters
    on the license plate when attaching the cam-
    era.
    Fig.5
    Abb. 5
    00-00
    Fig. 7
    Abb. 7
    2 Top
    3 Mark
    4 Bottom
    5 Make sure to install the rear view camera so that
    the mark is located on top of the camera.
    1 Hexagon wrench
    approx. 45 º
Pioneer ND-BC8

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre Pioneer ND-BC8 o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Pioneer ND-BC8 responder adecuadamente a su pregunta.

Vea el manual de Pioneer ND-BC8 aquí, de forma gratuita. Este manual pertenece a la categoría Dash Cams y ha sido calificado por 1 personas con un promedio de 7.5. Este manual está disponible en los siguientes idiomas: Español, Inglés, Alemán, Francia, Italiano. ¿Tiene alguna pregunta sobre Pioneer ND-BC8 o necesita ayuda? Haz tu pregunta aquí

Especificaciones de Pioneer ND-BC8

Marca Pioneer
Modelo ND-BC8
Producto dashcam
EAN 0884938302869, 4923143145178, 0731215378607, 7708575726297
Idioma Español, Inglés, Alemán, Francia, Italiano
Tipo de archivo PDF
Diseño
Tipo de sensor CMOS
Color del producto Negro
Tamaño del sensor óptico 1/4
Desempeño
Ángulo de visión, horizontal 129°
Ángulo de visión, vertical 105°
Megapixeles 0.3MP
Detalles técnicos
Tipo de lente Ángulo amplio
Peso y dimensiones
Peso 132g
Ancho 23.8mm
Altura 23.8mm
Profundidad 25.5mm

Manuales de productos relacionados

dashcam Pioneer

Utilizamos cookies para asegurar que damos la mejor experiencia al usuario en nuestro sitio web. Si continúa utilizando este sitio asumiremos que está de acuerdo.

Leer más