Plextor S3C

Plextor S3C manual

(1)
  • S3C
    Product features
    Advanced technologies and high
    quality components - Hynix 14nm
    triple level cell NAND and SMI 2254
    controller IC
    Exclusive PlexNitro performance
    optimization technology
    Supports -PlexTurbo, PlexCompressor,
    and PlexVault
    3x faster than typical Hard Disk Drive
    -sequential read/write speed of up to
    550/520 MB/s and random read/write
    speeds of 92K/79K IOPS.
    Available in:2.5" and M.2 2280 form
    factors
    Multiple capacity options: 128, 256,
    and 512 GB
    Three-year warranty
    The top choice for next-generation SSD upgrade! The Plextor S3
    solid-state drive series uses the latest technologies and components,
    including our proprietary PlexNitro cache technology. It is combined
    with intelligent SSD software technologies to provide a high-value SSD
    masterpiece that meets your computing expectations.
    The best price-performance ratio
    Satisfy your expectations for entry-level SSDs with the highest performances at affordable
    prices. The Plextor S3's advantages come from Plextor's advanced technologies, combined with
    high-quality components and proprietary firmware. The S3 series offers solid-state drives with
    the highest price-performance ratio.
    New processes for advanced components
    Only the latest components were selected for the S3 series namely, Hynix's advanced 14nm
    process triple level cell NAND flash memory, and SMI 2254 controller. These components
    combined allows the M8Se Series to deliver sequential read/write speeds of 550/520 MB/s with
    random read/write speeds of 92K/79K IOPS. Compared to the sluggish and traditional hard
    drives, this is a remarkable level of performance. Despite being entry-level devices, their
    professional quality standard is nonetheless worth noting.
    Real capacity of high speed cache
    Use the SSDs full storage capacity! The proprietary industry-leading PlexNitro technology uses
    SLC cache design, which means the S3 does not need to reserve over-provisioning space, thus
    leading to accelerated read/write speeds. This means the users can use the full capacity of the
    drive. Take 128GB SSD as an example: after deducting the over-provisioning space used by other
    brands, only about 120GB of space will be left. With the PlexNitro performance optimization
    technology,, however, the full 128GB of space can be used, with no reduction at all.
    Ideal for custom PC building and upgrades
    The S3 series comes in two form factors - SATA 2.5-inch (S3C) and M.2 2280 (S3G) and offers 3
    capacity options: 128GB, 256GB and 512GB. It can fully satisfy the installation requirements of
    desktop and laptop devices, as well as other devices that use SSDs. This makes the S3 series the
    most flexible choice.
    Plextor's high quality product guarantee
    The S3 Series boasts of Plextor's consistent guarantee of the highest quality standards. It has
    passed rigorous inspections with the most advanced SSD testing equipment in the world; not a
    single error or fault is allowed (Zero Error). It also uses the "Plextor endurance testing
    mechanism" to simulate a range of professional read-write scenarios, to ensure stability and data
    security for users.
    S3 Series 2.5-inch Solid State Drive
    SATA 6Gb/s
Plextor S3C

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre Plextor S3C o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Plextor S3C responder adecuadamente a su pregunta.

Vea el manual de Plextor S3C aquí, de forma gratuita. Este manual pertenece a la categoría Unidades de estado sólido (SSD ) y ha sido calificado por 1 personas con un promedio de 9.6. Este manual está disponible en los siguientes idiomas: Inglés. ¿Tiene alguna pregunta sobre Plextor S3C o necesita ayuda? Haz tu pregunta aquí

Especificaciones de Plextor S3C

General
Marca Plextor
Modelo S3C
Producto Unidad de estado sólido (SSD )
Idioma Inglés
Tipo de archivo PDF
Características
SDD, capacidad 512 GB
Interfaz Serial ATA III
Velocidad de lectura 550 MB/s
Velocidad de escritura 520 MB/s
Componente para PC/ordenador portátil
NVMe -
Tipo de memoria TLC
Tamaño de unidad de almacenamiento de búfer 512 MB
Velocidad de transferencia de datos 6 Gbit/s
Lectura aleatoria (4KB) 72000 IOPS
Escritura aleatoria (4KB) 57000 IOPS
Soporte S.M.A.R.T. Si
Soporte TRIM Si
Cola de comandos nativos (NCQ) Si
Tipo de controlador SMI SM2254
Tiempo medio entre fallos 15000 h
Factor de forma de disco SSD 2.5"
Certificación UL, TUV, FCC, CE, BSMI, VCCI, RCM, KCC, EAC, WHQL
Sistema operativo Windows soportado Si
Sistema operativo MAC soportado Si
Sistema operativo Linux soportado Si
Otras características
Color del producto Plata
Detalles técnicos
Certificados de sostenibilidad RoHS
Control de energía
Voltaje de operación 5 V
Condiciones ambientales
Intervalo de temperatura operativa 0 - 70 °C
Golpes en funcionamiento 15000 G
Vibración operativa 3.08 G
Peso y dimensiones
Ancho 69.85 mm
Profundidad 100 mm
Altura 6.8 mm
Peso 60 g