Sony RDP-XF300IP

Sony RDP-XF300IP manual

(1)
  • Personal Audio
    Docking System
    4-400-213-33(1)
    ©2012 Sony Corporation Printed in China
    Reference Guide GB
    Note
    
    In the Reference Guide, “iPod” is used as a general
    reference to functions on an iPod, iPhone or iPad, unless
    otherwise specified by the text or illustrations.
    If you have any questions or problems concerning your
    unit, please consult your nearest Sony dealer.
    General information
    Specifications
    iPod
    DC out: 5 V
    MAX: 2.1 A
    Radio
    Frequency range
    Band Frequency Frequency step
    FM 87.5 MHz - 108 MHz 0.05 MHz
    Bluetooth
    Output
    Bluetooth Specification Power Class 2
    Maximum communication range
    Line of sight approx. 10 m*
    1
    Frequency band
    2.4 GHz band (2.4000 GHz – 2.4835 GHz)
    Communication System
    Bluetooth Specification Version 2.1 + EDR (Enhanced
    Data Rate)
    Compatible Bluetooth Profiles*
    2
    A2DP (Advanced Audio Distribution Profile)
    AVRCP*
    3
    (Audio/Video Remote Control Profile)
    Supported codec*
    4
    SBC (Subband Codec)
    *
    1
    The actual range will vary depending on factors such as obstacles
    between devices, magnetic fields around a microwave oven,
    static electricity, reception sensitivity, aerial performance,
    operating system, application software, etc.
    *
    2
    Bluetooth standard profiles provide the specifications for
    Bluetooth communication between devices.
    *
    3
    Some operations may not be available for some models of iPod.
    *
    4
    Codec: Audio signal compression and conversion format
    General
    Speaker
    Woofer: Approx. 76 mm dia. × 2
    Tweeter: Approx. 25 mm dia. × 2
    Input
    AUDIO IN jack (ø 3.5 mm stereo minijack)
    Impedance: 50 kΩ
    Average input level: 245 mV
    Power output
    20 W + 20 W (at 1% harmonic distortion) (with AC
    adaptor)
    7 W + 7 W (at 1% harmonic distortion) (with rechargeable
    battery)
    Power source
    Rated external power source: DC IN 20 V (with supplied
    AC adaptor (AC 100 V - 240 V, 50 Hz/60 Hz) or
    rechargeable battery pack NH-300RDP)
    Battery life*:
    Approx. 7 hours (playback of iPod)
    Approx. 7 hours (FM reception)
    Approx. 6.5 hours (Bluetooth playback)
    Dimensions
    Approx. 356.0 mm × 168.1 mm × 121.7 mm (w/h/d)
    (incl. projecting parts and controls)
    Mass
    Approx. 2.6 kg
    Supplied accessories
    Remote control (with a lithium battery) (1)
    AC adaptor (1)
    AC power cord (1)
    Reference Guide (this document) (1)
    Cushion for small-size iPod (1)
    * Measured by Sony standards. The actual battery life may vary
    depending on the circumstance of the unit.
    Compatible iPod/iPhone/iPad
    models
    The compatible iPod/iPhone/iPad models are as follows.
    Update the software of the iPod/iPhone/iPad to the latest
    version before using it with this unit.
    Dock Connector compatible models
    iPod touch (4th generation)
    iPod touch (3rd generation)
    iPod touch (2nd generation)
    iPod nano (6th generation)*
    iPod nano (5th generation)
    iPod nano (4th generation)
    iPod nano (3rd generation)
    iPod classic 160GB (2009)
    iPhone 4S
    iPhone 4
    iPhone 3GS
    iPhone 3G
    iPad 2
    iPad
    Wireless music streaming compatible models
    iPod touch (4th generation)
    iPod touch (3rd generation)
    iPod touch (2nd generation)
    iPhone 4S
    iPhone 4
    iPhone 3GS
    iPhone 3G
    iPad 2
    iPad
    RDP-XF300iP
    WARNING
    To reduce the risk of fire or electric shock, do
    not expose this apparatus to rain or moisture.
    To reduce the risk of fire, do not cover the ventilation of
    the apparatus with newspapers, tablecloths, curtains, etc.
    And do not place lighted candles on the apparatus.
    To reduce the risk of fire or electric shock, do not expose
    this apparatus to dripping or splashing, and do not place
    objects filled with liquids, such as vases, on the apparatus.
    Do not install the appliance in a confined space, such as a
    bookcase or built-in cabinet.
    Do not expose the batteries (battery pack or batteries
    installed) to excessive heat such as sunshine, fire or the like
    for a long time.
    As the main plug is used to disconnect the unit from the
    mains, connect the unit to an easily accessible AC outlet.
    Should you notice an abnormality in the unit, disconnect
    the main plug from the AC outlet immediately.
    The unit is not disconnected from the AC power source
    (mains) as long as it is connected to the wall outlet, even if
    the unit itself has been turned off.
    The nameplate and important information concerning
    safety are located on the bottom exterior of the main unit
    and on the surface of the AC adaptor.
    CAUTION
    Danger of explosion if battery is incorrectly replaced.
    Replace only with the same type.
    Notice for customers: the following information is
    only applicable to equipment sold in countries
    applying EU directives
    The manufacturer of this product is Sony Corporation, 1-
    7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan. The
    Authorized Representative for EMC and product safety is
    Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327
    Stuttgart, Germany. For any service or guarantee matters,
    please refer to the addresses given in separate service or
    guarantee documents.
    Hereby, Sony Corp., declares that this equipment is in
    compliance with the essential requirements and other
    relevant provisions of Directive 1999/5/EC. For details,
    please access the following URL:
    http://www.compliance.sony.de/
    Use of the RLAN network is governed:
    with respect to private use, by the Legislative Decree of
    1.8.2003, no. 259 (“Code of Electronic
    Communications”). In particular Article 104 indicates
    when the prior obtainment of a general authorization is
    required and Art. 105 indicates when free use is
    permitted;
    * The iPod nano (6th generation) cannot be controlled by the
    remote when the command of “MENU,” “,” “,” and “ENTER
    is pressed.
    Design and specifications are subject to change without
    notice.
    Troubleshooting
    General
    The power does not turn on when the AC adaptor is
    connected.
    Make sure the AC adaptor is connected to the wall outlet
    firmly.
    The rechargeable battery is depleted.
    Connect the AC adaptor to charge the battery.
    There is no sound.
    Adjust VOLUME +/− (VOL +/− on the remote).
    Noise is heard.
    Ensure that the unit is not near in-use portable phones,
    etc.
    The power will not turn on when the AC adaptor is
    disconnected.
    The Power Off Hold function may be set. In this case,
    cancel the Power Off Hold function. (See “Power Off
    Hold function.”)
    The rechargeable battery may be depleted. In this case,
    connect the AC adaptor to charge the battery. (See “To
    use the AC adaptor.”)
    “ERROR” appears in the display and the unit turns off
    automatically.
    If this symptom occurs frequently, consult your nearest
    Sony dealer.
    When using an iPod on the Dock
    There is no sound.
    Make sure the iPod is connected firmly.
    Make sure that the function for iPod is activated.
    Operation is not performed.
    Make sure the iPod is connected firmly.
    Check that the iPod is compatible with this unit. (See
    “Dock Connector compatible models.”)
    The iPod does not charge.
    Make sure the iPod is connected firmly.
    Make sure the AC adaptor is connected firmly.
    Check that the iPod is compatible with this unit. (See
    “Dock Connector compatible models.”)
    When using the Bluetooth connection
    There is no sound.
    Ensure that this unit is not too far from the iPod, or this
    unit is not receiving interference from a wireless LAN,
    other 2.4 GHz wireless device, or microwave oven.
    Check that the Bluetooth connection is made properly
    between this unit and the iPod.
    Pair this unit and the iPod again.
    Keep away from metal objects or surfaces.
    Make sure that the Bluetooth function is activated.
    Sound skips or the correspondence distance is short.
    If a device that generates electromagnetic radiation, such
    as a wireless LAN, other Bluetooth device(s), or a
    microwave oven is nearby, move away from such
    sources.
    Remove any obstacle between this unit and the iPod or
    move away from the obstacle.
    Locate this unit and the iPod as close to each other as
    possible.
    Re-position this unit.
    Re-position the iPod.
    Connecting cannot be done.
    Perform pairing again. (See “To pair with an iPod.”)
    Check that the iPod is compatible with this unit. (See
    “Wireless music streaming compatible models.”)
    Pairing cannot be done.
    Bring this unit and the iPod closer together.
    Delete the unit from the iPod and perform pairing again.
    Check that the iPod is compatible with this unit. (See
    “Wireless music streaming compatible models.”)
    Radio
    Reception is poor.
    Extend the aerial to its full length, and orientate for best
    FM reception.
    The sound is weak or is of poor quality.
    If the unit is close to a TV, move it away from the TV.
    The TV picture is unstable.
    If you are listening to an FM program near a TV with an
    indoor aerial, move the unit away from the TV.
    Audio-in
    There is no sound.
    Make sure the audio connecting cable is connected
    firmly.
    Make sure that the connected optional component is in
    playback mode.
    Make sure that the Audio-in function is activated.
    The sound is low.
    Check the volume of the connected optional component.
    with respect to the supply to the public of the RLAN
    access to telecom networks and services, by the
    Ministerial Decree 28.5.2003, as amended, and Art.
    25 (general authorization for electronic communications
    networks and services) of the Code of electronic
    communications.
    On Copyrights and Licenses
    The Bluetooth word mark and logos are owned by the
    Bluetooth SIG, Inc. and any use of such marks by Sony
    Corporation is under license. Other trademarks and trade
    names are those of their respective owners.
    iPhone, iPod, iPod classic, iPod nano, and iPod touch are
    trademarks of Apple Inc., registered in the U.S. and other
    countries. iPad is a trademark of Apple Inc.
    Made for iPod,” “Made for iPhone,” andMade for iPad
    mean that an electronic accessory has been designed to
    connect specifically to iPod, iPhone, or iPad, respectively, and
    has been certified by the developer to meet Apple
    performance standards. Apple is not responsible for the
    operation of this device or its compliance with safety and
    regulatory standards. Please note that the use of this accessory
    with iPod, iPhone, or iPad may affect wireless performance.
    Use of this radio equipment is not allowed in the
    geographical area within a radius 20km from the centre of
    Ny-Alesund, Svalbard in Norway.
    Precautions
    
    To disconnect AC power, grasp the plug itself, not the
    cord.
    
    Since a strong magnet is used for the speaker, keep credit
    cards using magnetic coding or spring-wound watches,
    CRT-based TVs, or projectors, etc., away from the unit
    to prevent possible damage from the magnet.
    
    Do not leave the unit in a location near a heat source
    such as a radiator or airduct, or in a place subject to
    direct sunlight, excessive dust, mechanical vibration, or
    shock.
    
    Allow adequate air circulation to prevent internal heat
    build-up. Do not place the unit on a surface (a rug, a
    blanket, etc.) or near materials (a curtain) which might
    block the ventilation holes.
    
    Should any solid object or liquid fall into the unit,
    unplug the unit and have it checked by qualified
    personnel before operating it any further.
    
    During a thunderstorm, do not touch the antenna
    (aerial) and plug.
    
    Do not touch the unit with wet hands.
    
    Do not place the unit anywhere near water.
    NOTES ON LITHIUM BATTERY
    
    Wipe the battery with a dry cloth to assure a good
    contact.
    
    Be sure to observe the correct polarity when installing
    the battery.
    
    Do not hold the battery with metallic tweezers,
    otherwise a short-circuit may occur.
    Disposal of Old Electrical & Electronic
    Equipment (Applicable in the European
    Union and other European countries with
    separate collection systems)
    This symbol on the product or on its packaging indicates
    that this product shall not be treated as household waste.
    Instead it shall be handed over to the applicable collection
    point for the recycling of electrical and electronic
    equipment. By ensuring this product is disposed of
    correctly, you will help prevent potential negative
    consequences for the environment and human health,
    which could otherwise be caused by inappropriate waste
    handling of this product. The recycling of materials will
    help to conserve natural resources. For more detailed
    information about recycling of this product, please contact
    your local Civic Office, your household waste disposal
    service or the shop where you purchased the product.
    Applicable accessory: Remote control.
    Disposal of waste batteries (applicable
    in the European Union and other
    European countries with separate
    collection systems)
    This symbol on the battery or on the packaging indicates
    that the battery provided with this product shall not be
    treated as household waste.
    On certain batteries this symbol might be used in
    combination with a chemical symbol. The chemical
    symbols for mercury (Hg) or lead (Pb) are added if the
    battery contains more than 0.0005% mercury or 0.004%
    lead.
    By ensuring these batteries are disposed of correctly, you
    will help prevent potentially negative consequences for the
    environment and human health which could otherwise be
    caused by inappropriate waste handling of the battery. The
    recycling of the materials will help to conserve natural
    resources.
    In case of products that for safety, performance or data
    integrity reasons require a permanent connection with an
    incorporated battery, this battery should be replaced by
    qualified service staff only.
    To ensure that the battery will be treated properly, hand
    over the product at end-of-life to the applicable collection
    point for the recycling of electrical and electronic
    equipment.
    For all other batteries, please view the section on how to
    remove the battery from the product safely. Hand the
    battery over to the applicable collection point for the
    recycling of waste batteries.
    For more detailed information about recycling of this
    product or battery, please contact your local Civic Office,
    your household waste disposal service or the shop where
    you purchased the product.
    On Bluetooth communication
    Bluetooth wireless technology operates within a range of
    about 10 meters.
    Maximum communication range may vary depending
    on obstacles (human body, metal, wall, etc.) or
    electromagnetic environment.
    Steel cabinet
    Limited performance
    Optimal performance
    The unit
    The following conditions may affect the sensitivity of
    Bluetooth communication.
    There is an obstacle such as a person, metal, or wall
    between this unit and iPod.
    A device using 2.4 GHz frequency, such as a wireless
    LAN device, cordless telephone, or microwave oven,
    is in use near the unit.
    The unit is installed on a shelf made of steel.
    Because Bluetooth devices and wireless LAN
    (IEEE802.11b/g/n) use the same frequency, microwave
    interference may occur and resulting in communication
    speed deterioration, noise, or invalid connection if this
    unit is used near a wireless LAN device. In such a case,
    perform the following.
    Use this unit at least 10 m away from any wireless
    LAN device.
    If this unit is used within 10 m of a wireless LAN
    device, turn off the wireless LAN device.
    Install this unit and iPod as near to each other as
    possible.
    Microwaves emitting from a Bluetooth device may affect
    the operation of electronic medical devices. Turn off this
    unit and iPod in the following locations, as it may cause
    an accident.
    where inflammable gas is present, in a hospital, train,
    airplane, or a petrol station
    near automatic doors or a fire alarm
    This unit supports security capabilities that comply with
    the Bluetooth standard to provide a secure connection
    when the Bluetooth wireless technology is used, but
    security may be insufficient, depending on the setting.
    Be careful when communicating using Bluetooth
    wireless technology.
    We do not take any responsibility for leakage of
    information during Bluetooth communication.
    Connection with all Bluetooth devices cannot be
    guaranteed.
    A device featuring Bluetooth function is required to
    conform to the Bluetooth standard specified by
    Bluetooth SIG, Inc. and be authenticated.
    Even if the connected device conforms to the above
    mentioned Bluetooth standard, some devices may not
    be connected or work correctly, depending on the
    features or specifications of the device.
    Depending on the device to be connected, it may require
    some time to start communication.
    Remote control
    The remote does not function.
    The unit cannot be turned on with the remote when the
    AC adaptor is disconnected. In this case, press  on
    the unit to turn it on.
    Replace the battery in the remote with a new one if it is
    weak.
    Make sure that you are pointing the remote at the remote
    sensor on the unit.
    Do not cover or place any objects directly in front of the
    (Remote sensor) receiver.
    Remove any obstacles in the path of the remote and the
    unit.
    Make sure the remote sensor is not exposed to strong
    light such as direct sunlight or fluorescent lamp light.
    If the problem persists, consult your nearest Sony dealer.
    Preparations
    Power source
    Auto power off
    After playback of the music (from an iPod on the Dock,
    Bluetooth connection, or optional component connected
    to the AUDIO IN jack) has finished, and if no operation is
    performed for about 20 minutes, the unit will
    automatically turn off.
    Notes
    While the unit is turned on, if no operation is performed
    for more than about 30 seconds, the display turns off. In
    this case, press SOUND to turn on the display again.
    The unit cannot be turned on with the remote when the
    AC adaptor is disconnected.
    To use the AC adaptor
    1 Connect the supplied AC power cord to the AC
    adaptor.
    2 Connect the AC adaptor to the DC IN 20V jack
    on the back of this unit firmly and plug it into a
    wall outlet.
    Note on the AC adaptor
    Use the supplied Sony AC adaptor only. The polarity of
    the plugs of other manufacturers may be different.
    Failure to use the supplied AC adaptor may cause the
    unit to malfunction.
    3 Confirm that charging has started.
    When charging starts, the battery indicator appears.
    While charging, the charging indicator animation
    loops.
    When the unit is turned off
    When charging completes, the full battery indicator
    appears for a while, and then disappears.
    
    Notes
    If you connect the AC adaptor when the battery is fully
    charged, the full battery indicator appears for a while,
    and then disappears.
    If you connect the AC adaptor when the battery power is
    low, charging starts and the low battery and charging
    indicator animation loops.
    The unit cannot be operated without the AC adaptor while
    the low battery indicator appears.
     
    When the unit is turned on
    When charging completes, the full battery indicator
    appears.
    Note
    It will take approximately 6 hours to fully charge the
    battery.
    To use the rechargeable battery
    You can operate the unit with the rechargeable battery
    instead of the AC adaptor.
    Note
    The maximum output volume will be lower when the
    AC adaptor is disconnected.
    To check the remaining power of the battery
    The remaining power of the battery will be indicated when
    the unit is turned on. As the remaining battery power
    depletes, the battery indicator decreases.
    Level 1 Level 2 Level 3 Level 4
    When the battery becomes almost fully depleted, “LOW
    BATT” flashes and the unit will turn off. To charge the
    battery, connect the AC adaptor. (See “To use the AC
    adaptor.”)
     
    Notes
    The remaining battery power will not be indicated when
    the unit is turned off.
    The unit requires at least 30 minutes to charge the
    battery if “LOW BATT” appears.
    The battery indicator shows approximate remaining
    battery power.
    Operating conditions will affect the rate of battery
    depletion.
    When to replace the rechargeable battery
    Repeated recharging causes the duration of the battery
    power to decrease over time. Replace the battery pack
    when its duration becomes half the usual period, even after
    charging it fully.
    Note
    The rechargeable battery pack is not a commercially
    available product. To purchase rechargeable battery pack
    (NH-300RDP), consult your nearest Sony dealer.
    To replace the rechargeable
    battery
    1 Remove the screw of the battery compartment at
    the bottom of the unit, and open the lid.
    2 Disconnect the connector of the battery pack and
    pull it out.
    3 Insert a new battery pack and connect its
    connector to the jack.
    4 Replace the battery compartment lid and tighten
    the screw.
    Notes
    
    When replacing the battery pack, place a soft cloth etc.,
    under the unit.
    
    Turn off the unit and disconnect the AC adaptor before
    removing the old battery pack.
    
    Charge a new battery pack before use. For details, see
    “To use the AC adaptor.
    Remote control
    Before using the supplied remote for the first time, remove
    the insulation film.
    Aim the remote at the (Remote sensor) of the unit.
    When to replace the battery
    With normal use, the battery (CR2025) should last for
    about 6 months. When the remote can no longer operate
    the unit, replace the battery with a new one.
    side facing up
    Note
    
    If you are not going to use the remote for a long time,
    remove the battery to avoid any damage that may be caused
    by leakage or corrosion.
    Continued on the reverse side
Sony RDP-XF300IP

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre Sony RDP-XF300IP o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Sony RDP-XF300IP responder adecuadamente a su pregunta.

Vea el manual de Sony RDP-XF300IP aquí, de forma gratuita. Este manual pertenece a la categoría Altavoces Dock y ha sido calificado por 1 personas con un promedio de 6.2. Este manual está disponible en los siguientes idiomas: Inglés. ¿Tiene alguna pregunta sobre Sony RDP-XF300IP o necesita ayuda? Haz tu pregunta aquí

Especificaciones de Sony RDP-XF300IP

General
Marca Sony
Modelo RDP-XF300IP
Producto Altavoz Dock
EAN 4905524923544, 8029276073473
Idioma Inglés
Tipo de archivo PDF
Audio
Canales de salida de audio 2.0canales
Potencia estimada RMS 40W
Rango de frecuencia -Hz
Obstrucción 4
Puertos e Interfaces
Auriculares -
Bluetooth
Entrada auxiliar
Perfiles de Bluetooth A2DP, AVRCP
Radio
Radio FM
Cantidad de estaciones predeterminadas 20
Bandas de radio soportadas FM
Control de energía
Alimentación AC, Battery
Tecnología de batería Níquel-metal hidruro (NiMH)
Voltaje de entrada AC 100 - 240V
Autonomía 6h
Consumo energético 60W
Cargador incorporado
Peso y dimensiones
Ancho 356mm
Profundidad 121.7mm
Altura 168.1mm
Peso 2600g
Contenido del embalaje
Manual de usuario
Diseño
Color del producto Negro
Control de volumen Digital
Diámetro del woofer 76mm
Diámetro del tweeter 25mm
Desempeño
Compatibilidad con bases dock de Apple iPad, iPhone, iPod
Ecualizador
Modos de ecualización Flat, jazz, Pop, Rock
Otras características
Conexión inalámbrica
Exhibición
Pantalla OLED

ManualPDF.es

¿Busca un manual? ManualPDF.es asegura que encontrará el manual que está buscando en un abrir y cerrar de ojos. Nuestra base de datos contiene más de 1 millón de manuales en PDF de más de 10.000 marcas. Cada día añadimos los últimos manuales para que siempre encuentres el producto que buscas. Es muy sencillo: simplemente escriba el nombre de la marca y el tipo de producto en la barra de búsqueda y podrá ver instantáneamente el manual de su elección en línea de forma gratuita.

ManualPDF.es

© Copyright 2020 ManualPDF.es. Todos los derechos reservados.

Utilizamos cookies para asegurar que damos la mejor experiencia al usuario en nuestro sitio web. Si continúa utilizando este sitio asumiremos que está de acuerdo.

Leer más