• Available USB port on video source (during Copy only)
• DVI-D video cable (from video source)
• DVI-D video cable (to display)
VSEDIDDVI
DVI EDID Emulator with EDID Copy
Installation
EDID information contains important display settings such as
maximum image size, color characteristics, factory pre-set timings,
frequency range limits, etc., and since most video extender systems
don’t oer EDID communication between the source and remote
display, the DVI EDID Emulator is a perfect workaround for ensuring
the optimum signal is provided to the display to help prolong the
life of your displays.
EDID Copy
To clone/copy the EDID from a display.
1. Set the rotary dial to position 1.
2. Connect the USB to DC power cable from the unit, to an available
USB port on the video source device (may need to be powered
on) or display device. The Status LED will light up blue.
3. Connect the EDID compliant display device to the Monitor port
on the EDID Emulator using the appropriate type of DVI cable
(DVI-D, dual or single link). Power on the display device.
4. Press and hold the EDID Program button until the Status LED
starts to ash green. The LED will ash green/red while copying.
5. Once the Status LED returns to blue, the EDID Copy has
completed successfully.
Preset EDID Emulation
If you are unable to clone the EDID from a display device, or are
using non-EDID compliant displays, basic preset EDIDs built into the
EDID Emulator can be used.
1. Set the rotary dial to the position for the maximum resolution you
wish to set.
PositionDescription
0Pass through
1EDID Copy
21024 x 768
31280 x 720
41280 x 1024
51366 x 768
61440 x 900
71600 x 900
81600 x 1200
91680 x 1050
A1920 x 1080
B1920 x 1200
C1920 x 1440
D2048 x 1152
E2560 x 1440
F2560 x 1600
*actual product may vary from photos
Whatsapp
Mail
Facebook
¿Necesita ayuda?
Número de preguntas: 0
¿Tiene alguna pregunta sobre StarTech.com VSEDIDDVI o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de StarTech.com VSEDIDDVI responder adecuadamente a su pregunta.
Acerca de StarTech.com VSEDIDDVI
+2
Vea el manual de StarTech.com VSEDIDDVI aquí, de forma gratuita. Este manual pertenece a la categoría Convertidores de audio / vídeo y ha sido calificado por 1 personas con un promedio de 9.9. Este manual está disponible en los siguientes idiomas: Engels. ¿Tiene alguna pregunta sobre StarTech.com VSEDIDDVI o necesita ayuda? Haz tu pregunta aquí
Utilizamos cookies para asegurar que damos la mejor experiencia al usuario en nuestro sitio web. Si continúa utilizando este sitio asumiremos que está de acuerdo.
Instruction ManualDE: Bedienungsanleitung - de.startech.comFR: Guide de l'utilisateur - fr.startech.comES: Guía del usuario - es.startech.comIT: Guida per l'uso - it.startech.comNL: Gebruiksaanwijzing - nl.startech.comPT: Guia do usuário - pt.startech.comManual Revision: 05/16/2012For the most up-to-date information, please visit: www.startech.comPackaging Contents• 1 x DVI EDID Emulator• 1 x USB to DC Power Cable• 1 x Pack, Rubber Feet• 1 x Instruction ManualSystem Requirements• DVI-D enabled display device (i.e. monitor, projector, etc.)• DVI-D enabled video source (i.e. computer)• Available USB port on video source (during Copy only)• DVI-D video cable (from video source)• DVI-D video cable (to display)VSEDIDDVIDVI EDID Emulator with EDID CopyInstallationEDID information contains important display settings such asmaximum image size, color characteristics, factory pre-set timings,frequency range limits, etc., and since most video extender systemsdon’t oer EDID communication between the source and remotedisplay, the DVI EDID Emulator is a perfect workaround for ensuringthe optimum signal is provided to the display to help prolong thelife of your displays.EDID CopyTo clone/copy the EDID from a display.1. Set the rotary dial to position 1.2. Connect the USB to DC power cable from the unit, to an availableUSB port on the video source device (may need to be poweredon) or display device. The Status LED will light up blue.3. Connect the EDID compliant display device to the Monitor porton the EDID Emulator using the appropriate type of DVI cable(DVI-D, dual or single link). Power on the display device.4. Press and hold the EDID Program button until the Status LEDstarts to ash green. The LED will ash green/red while copying.5. Once the Status LED returns to blue, the EDID Copy hascompleted successfully.Preset EDID EmulationIf you are unable to clone the EDID from a display device, or areusing non-EDID compliant displays, basic preset EDIDs built into theEDID Emulator can be used.1. Set the rotary dial to the position for the maximum resolution youwish to set.Position Description0 Pass through1 EDID Copy2 1024 x 7683 1280 x 7204 1280 x 10245 1366 x 7686 1440 x 9007 1600 x 9008 1600 x 12009 1680 x 1050A 1920 x 1080B 1920 x 1200C 1920 x 1440D 2048 x 1152E 2560 x 1440F 2560 x 1600*actual product may vary from photos
