Storex DNR-30H Network Camera

Storex DNR-30H Network Camera manual

  • To begin setup, insert the installation CD into your CD-ROM
    drive, and the iWizard will start automatically.
    - If it doesn’t, browse the contents of the CD and run the ‘iWizard.exe.
    - If you have no CD-ROM drive, please use this link to download
    software installation:
    - Select your language [Next]. Then choose IP camera to set up [ok]
    Step 1 shows how to connect cables [Next]. Check the LED statut [Next].
    Step 2 iWizard scan for available cameras on your local network.
    - Select a camera and wait until the live video appears on the right.
    (You can check Current settings with the camera's bottom sticker).
    -You can verify FW versions from:
    Click [Next] when you’re ready. Meanwhile, if you see the
    Windows Security Alert dialog box during the search, please
    choose [Unblock].
    The default password is "admin". If you need you can change it
    (please note down your new password).
    Click [Next] to skip this process.
    Check the camera name, date and time setting.
    Package Contents
    Please check the package contents. If anything is missing, please don’t
    hesitate to contact your local distributor.
    Network camera RJ-45 LAN cable
    Power adaptor (12V, 2A) & cable Quick start guide
    Installation CD Wall mount plate
    Screw for ceiling mount x 3,
    screw anchor x 3, camera pad x4
    Connecting the Cables
    LAN cable from PC to hub/router: If your LAN cable from PC has
    been connected to the Cable/ADSL modem, please re-connect it
    to the LAN port of your hub/router.
    LAN port on camera: Use the bundled RJ-45 LAN cable to connect
    the LAN port of the IP camera to the LAN port of your hub/router.
    Wireless adaptor (optional accessory): If you have purchased the
    Storex USB wireless adaptor, plug it into the USB port of IP camera
    for wireless reception. it can only supports the wireless adaptors
    from Storex; please do not use other USB adaptors on Storex IP
    Power: Attach the power adaptor to the cameras power connector
    and connect the power plug to a power outlet.
    Camera Layout
    IR LEDs x 6 (12 in total)
    Light sensor
    IR LEDs x 6 (12 in total)
    LED status indicator
    USB Wireless adaptor connector
    Power connector
    Ethernet port
    I/O box connector
    Audio output
    microSD/SDHC card slot
    Reset button
    Microphone input
    Do not rotate your PTZ camera manually as it may damage it
    Network Camera
    Quick Installation Guide
    Video Installation:
    Mounting the Camera
    Fix the mounting plate.
    Let fastening bracket slide into its position on the camera base (as circled).
    Attach the IP camera.
    Push and hold the bracket to the right.
    Loosen the screw that xes the trapezoid-shaped fastening
    Tighten the screw on the fastening bracket.
    Installing Camera Software
Storex DNR-30H Network Camera

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre Storex DNR-30H Network Camera o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Storex DNR-30H Network Camera responder adecuadamente a su pregunta.

Vea el manual de Storex DNR-30H Network Camera aquí, de forma gratuita. Este manual pertenece a la categoría Cámaras de vigilancia y ha sido calificado por 1 personas con un promedio de 7.8. Este manual está disponible en los siguientes idiomas: Inglés. ¿Tiene alguna pregunta sobre Storex DNR-30H Network Camera o necesita ayuda? Haz tu pregunta aquí

Especificaciones de Storex DNR-30H Network Camera

Marca Storex
Modelo DNR-30H Network Camera
Producto Cámara de vigilancia
Idioma Inglés
Tipo de archivo PDF

Preguntas frecuentes

A continuación, encontrarás las preguntas más frecuentes sobre el Storex DNR-30H Network Camera .

¿Tu pregunta no está en la lista? Haz tu pregunta aquí