Sylvania 6240VE

Sylvania 6240VE manual

(1)
  • If channel 3 is already occupied for broadcasting,
    1) Set your TV to channel 4.
    2) Insert a pre-recorded tape into the VCR.
    3) Press the PLAY button once.
    4) After a few seconds, press the PLAY button on the VCR for 3 seconds.
    The RF output channel will change to channel 4 from channel 3 and you will
    see a playback picture.
    When a picture does not appear on the TV screen, repeat step [4].
    5) Press the STOP button to stop playback.
    You can use the AUDIO OUT jack and
    VIDEO OUT jack on the back of the
    VCR if your TV has Audio/Video Input
    jacks. In this case, you need to set the
    TV to external Line Input Mode. Please
    refer to your TV’s owner’s manual.
    - 1 -
    Owner’s Manual
    Video Cassette Recorder
    6240VE
    If you need additional operating assistance after
    reading this owner’s manual or to order replace-
    ment accessories, please call
    TOLL FREE : 1-800-968-3429
    or visit our web site at http://www.funai-corp.com
    0VMN03900 / HF310UD ★★★★★
    Printed in China
    ANT
    AUDIO
    VIDEO
    IN
    OUT
    OUT IN
    ANT
    AUDIO
    VIDEO
    IN
    OUT
    OUT IN
    AUDIO IN jack
    Connect the audio cable from the audio out
    jack of a camcorder, another VCR, or an
    audio source.
    VIDEO IN jack
    Connect the video cable from the video out
    jack of a camcorder, another VCR, or an
    audio-visual source (laser disc player,
    video disc player, etc.).
    AUDIO OUT jack
    Connect the audio cable to the audio in jack
    of a camcorder, another VCR, a stereo
    amplifier, or an audio system.
    ANT IN jack
    Connect your antenna or cable box.
    ANT OUT jack
    Connect the RF cable (supplied) to
    the antenna input jack on your TV.
    Front & Rear Terminals
    Stereo TV Connection
    ANT
    IN
    OUT
    AUDIO
    ANT
    IN
    OUT
    VIDEO
    Connect
    1
    Audio/Video Cables
    (not supplied)
    LR
    AUDIO OUTVIDEO
    OUT
    LR
    AUDIO INVIDEO
    IN
    (Back of TV)
    INOUT
    (Back of VCR)
    • Remote control
    (NA371UD) with
    Tw o AA batteries
    • RF Cable
    (WPZ0901TM002)
    • Owner’s Manual
    (0VMN03900)
    Supplied Accessory
    Installing the Batteries for
    the Remote Control
    Install two AA batteries
    (supplied) matching the
    polarity indicated on
    the bottom of the
    remote control.
    Hint
    Hint
    The RF output channel may
    not change when you adjust
    tracking during playback. In
    this case, stop the playback,
    and start the playback again.
    After that, press the PLAY but-
    ton on the VCR for 3 seconds
    again.
    VIDEO OUT jack
    Connect the video cable to the video in jack
    of a camcorder, another VCR, or a TV.
    RF Output Channel
    MCHANNEL
    POWER
    VIDEO AUDIO
    TAPE IN
    TIMER
    V
    C
    R
    /T
    V
    P
    O
    W
    E
    R
    R
    E
    C
    1. Before using your VCR
    ANT
    IN
    OUT
    RF Cable (supplied)
    (Back of VCR)
    (Back of TV)
    (Back of TV)
    Plug the AC power cords of the VCR and TV into the AC outlets.
    4
    Disconnect
    Antenna
    or
    2
    Connect
    3
    Connect
    Cable
    Signal
    Antenna
    or
    Cable
    Signal
    Basic VCR/TV Connection
    Select this connection when you want to view or record a
    scrambled channel.
    With this connection, channels cannot
    be changed on the VCR. You can view or record ONLY the
    channels you have selected on the cable box or the satellite
    box.
    While you are recording, only the recorded channel can
    be viewed.
    T
    o select channels of the cable box or satellite box
    1)Turn on the VCR by pressing the POWER button, and
    then, press the VCR/TV button.The POWER and the
    VCR/TV indicators on the front panel will light on. Then,
    press the CHANNEL buttons to select channel 3 or 4
    (the same channel as the output channel of the cable
    box or satellite box).
    If you use the channel 4, you need to change the VCR’s
    RF output to channel 4. Refer to “RF Output Channel”.
    2) At the TV, select channel 3 or 4 (the same channel as
    you have selected at step 1).
    3) At the cable box or satellite box, select the channel you
    want to view or record.
    Select this connection when you want to change channels
    on the VCR. With this connection, you may watch one
    channel while recording another.
    You may not view or record a scrambled channel.
    T
    o select channels of the cable box or satellite box
    1)At the cable box or satellite box, select channel 3 or 4
    (the same channel as the VCR’s RF output channel.)
    Refer to “RF Output Channel”.
    2)At the TV, select the same channel as the output chan-
    nel (3 or 4) of the cable box or satellite box.
    3)Turn on the VCR by pressing the POWER button, and
    then, press the VCR/TV button .The POWER and
    VCR/TV indicators on the front panel will light on. Then,
    select the channel you want to view or record.
    T
    o play back a tape
    Follow the steps 1) to 2) above. Then, play back a tape.
    Refer to “Playback” on page 5.
    T
    o view one channel while recording another
    1)
    While you are recording on the VCR, press the VCR/TV but-
    ton so that the VCR/TV indicator disappears on the VCR.
    2)At the cable box or satellite box, select the channel you
    want to view.
    Hint for Cable Box or Satellite Box
    ANT
    IN
    OUT
    RF Cable
    (supplied)
    (Back of VCR)
    IN
    OUT
    E
    (Back of TV)
    Cable
    Signal
    Connection A
    (Cable box or
    Satellite box)
    ANT
    IN
    OUT
    RF Cable (supplied) RF Cable
    (Back of TV)
    IN
    OUT
    (Cable box or
    Satellite box)
    E
    Cable
    Signal
    Connection B
    (Back of VCR)
Sylvania 6240VE

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre Sylvania 6240VE o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Sylvania 6240VE responder adecuadamente a su pregunta.

Vea el manual de Sylvania 6240VE aquí, de forma gratuita. Este manual pertenece a la categoría Televisiones y ha sido calificado por 1 personas con un promedio de 7.5. Este manual está disponible en los siguientes idiomas: Inglés. ¿Tiene alguna pregunta sobre Sylvania 6240VE o necesita ayuda? Haz tu pregunta aquí

Especificaciones de Sylvania 6240VE

General
Marca Sylvania
Modelo 6240VE
Producto Televisión
Idioma Inglés
Tipo de archivo PDF

Preguntas frecuentes

A continuación, encontrarás las preguntas más frecuentes sobre el Sylvania 6240VE .

¿Tu pregunta no está en la lista? Haz tu pregunta aquí