Teradek Serv Pro manual

Teradek Serv Pro
(1)
  • número de páginas: 1
  • Tipo de archivo: PDF
  • MONITOR WITH VUER

    Connect power to Serv Pro using the included A/C adapter, or one of the available accessory
    power cables (see Teradek.com).
    Access Point (AP) Mode - AP mode is automatically enabled by default. Connect your device to Serv Pro’s
    Wi−Fi network: Teranet−XXXXX (serial number of the device).
    Connect the SDI or HDMI output from your video source to one of Serv Pro’s video input connectors (I, J).
    Plug an Ethernet cable into VidiU Pro’s 10/100/1000 Ethernet port and connect it to an Ethernet
    switch or router. Use the Menu joystick to navigate to the Network Setup menu, then select Wired to
    verify that Ethernet is set to DHCP and to view Serv Pro’s IP address.
    Open a web browser and enter Serv Pro’s IP address in the address bar.

    PHYSICAL CONNECTIONS

    1
    3
    1
    2
    3

    CONNECT VIA WIFI

    CONNECT VIA ETHERNET

    NEED MORE HELP?
    1. Support: http://support.teradek.com Contains tips, information and all the latest firmware & software updates.
    TERADEK SUPPORT STAFF: support@teradek.com or call 8889412111 ext.2 (MonFri 6am to 6pm PST)
    Stream Joystick:
    (button press): Access quick menu actions, exit menu screens
    Menu Joystick:
    ,,
    ,
    : Select menu items, change status screen on main display, select characters
    (button press): Confirm selection, open selected menu
    Reset Button:
    Hold for 3−6 seconds: Reset all network settings
    Hold for 10+ seconds: Perform complete factory reset
    A: Wi−Fi antenna
    B: Video input status
    C: Encoder status
    D: Broadcast status
    E: Fault/Error
    F: OLED display
    G: Stream joystick
    H: Menu joystick
    I: SD/HD/3G−SDI input
    J: HDMI input
    K: 10/100/1000 Ethernet
    L: Reset button
    M: Power input
    N: Power switch
    O: Mic/Line stereo input
    A
    B
    F
    Download VUER from the iTunes App Store (iOS devices), or from the Google Play Store (Android devices).
    Connect your device to the same network as Serv Pro (Ethernet or WiFi), then launch VUER.
    From the VUER app, tap CAMERA on the upper, left-hand corner, choose your device(s), then tap Done.
    1
    2
    3
    H
    C
    D
    E
    G
    Serv Pro is a wireless video transmitter
    that offers real-time monitoring on up
    to 10 iOS devices at very low latency.
    Serv Pro can be mounted on a camera or
    at video village, and offers up to 300 ft
    of range using its built-in Wi-Fi access
    points.

    REAL-TIME IOS

    MONITORING

    VUER is a free application that allows you to monitor and
    analyze up to four live HD video feeds simultaneously, each
    with its own set of tools to help you and your crew gain
    insights into your footage.
    To adjust the stream resolution and bitrate, long-press VIDEO on the Tool bar (F) to display the full menu.
    Make your selection, then tap APPLY.
    4
    J
    N
    M
    L
    K
    I
    O

    CONFIGURE SERV PRO

    4
    Serv Pro also has a web user interface (web UI) for configuring stream and network settings.
    The web UI can be accessed by using any available network interface.
    Connect your computer to the same network as Serv Pro.
    1
    Encryption - Enable or disable encryption.
    Image Overlay - Overlay imported images onto your video stream and adjust their placement.
    Audio - Configure the audio input source.
    SDI Ancillary Data - Extract timecode or closed captions data from the SDI input to embed into your stream.

    CONFIGURABLE SETTINGS

    Use the Menu joystick to navigate to the Network Setup menu, then select Wired to verify that Ethernet
    is set to DHCP and to view Serv Pro’s IP address. If using a Wi-Fi network, select WiFi, then select
    [Status] to view the IP address.
    2

    CONNECT TO SERV PRO

    2
    Infrastructure Mode - To configure Serv Pro to connect to a different network, switch to Infrastructure mode,
    then select Scan for Network.
    Use the Menu joystick to navigate to the Network Setup menu, then select a Wi-Fi mode.
    Teradek regularly releases new firmware versions to improve performance, add new features, or to fix vulnerabilities.
    Visit https://www.teradek.com to update your device with the latest firmware.
Teradek Serv Pro

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre Teradek Serv Pro o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Teradek Serv Pro responder adecuadamente a su pregunta.

Vea el manual de Teradek Serv Pro aquí, de forma gratuita. Este manual pertenece a la categoría Sistemas Hi-Fi y ha sido calificado por 1 personas con un promedio de 7.5. Este manual está disponible en los siguientes idiomas: Inglés. ¿Tiene alguna pregunta sobre Teradek Serv Pro o necesita ayuda? Haz tu pregunta aquí

Especificaciones de Teradek Serv Pro

General
Marca Teradek
Modelo Serv Pro
Producto sistema Hifi
Idioma Inglés
Tipo de archivo PDF
Puertos e Interfaces
Tipo de entrada HDMI
Tecnología de conectividad Inalámbrico y alámbrico
Wifi Si
Entrada HDMI 1
puertos de entrada BNC 1
Puertos de entrada RJ-45 1
Ethernet Si
Características
Tipo Transmisor de señales AV
Máxima resolución 1920 x 1080 Pixeles
Cantidad de antenas 2
Ganancia de antena (5 GHz) 2 dBi
Ganancia de antena (2.4 GHz) 2 dBi
Formato de vídeo soportado 480i,480p,576i,576p,720p,1080i,1080p
Color del producto Azul
Formatos de compresión de video H.264
Formatos gráficos soportados 960 x 540,1280 x 720 (HD 720),1920 x 1080 (HD 1080)
Protocolos de red compatibles TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP
Formatos de audio soportados AAC
Material Aluminio
Interruptor de encendido/apagado integrado Si
Estándares de red IEEE 802.11a,IEEE 802.11ac,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n
Contenido del embalaje
Adaptador AC incluido Si
Guía de configuración rápida Si
Cables incluidos BNC,HDMI,LAN (RJ-45)
Peso y dimensiones
Ancho 120.7 mm
Profundidad 76.2 mm
Altura 27.9 mm
Peso 328.9 g
Control de energía
Consumo energético 7 W
Consumo de energía (max) 8 W

Preguntas frecuentes

A continuación, encontrarás las preguntas más frecuentes sobre el Teradek Serv Pro .

¿Tu pregunta no está en la lista? Haz tu pregunta aquí