Xit XTCGT3i

Xit XTCGT3i manual

(1)
  • lNSTRUCTIONS
    The XTCGT3i is a battery grip that can hold two Battery Pack
    LP-E8 or six size-AA batteries. It is also equipped with a
    vertical-grip shutter button, Main Dial, etc. to enable shooting
    in the same way as with horizontal grip.
    ATTACHING TO THE CAMERA
    SPECIFICATIONS
    INSTALLING THE BATTERY PACKS
    INSERTING SIZE-AA BATTERIES
    Protective cover
    Electrical contacts
    Attachment screw
    Guide pin
    Attach/detach knob
    Battery magazine release handle
    DC cord mount
    Aperture/exposure compensation button
    AF point selection/Magnify button
    AE lock/FE lock/Index/Reduce button
    Vertical-grip operation switch
    Shutter button
    Camera battery compartment cover slot
    Main Dial
    Hand strap mount
    Tripod socket
    Battery magazine protective cover
    Battery magazine
    Battery pack compartment
    Battery magazine (For size-AA batteries)
    1. Remove the battery from the camera. (Fig. 1)
    2. Pull out the cameras battery compartment cover at a slanted
    angle to detach. (Fig. 2)
    Perform the operation over a table so as not to drop the
    camera
    3. lnsert the detached cover into its storage slot to ensure that it
    will not be lost. (Fig. 3)
    4. Remove the protective cover, and then insert the electrical
    contacts into the camera battery compartment. (Fig. 4-1)
    5. Align the attachment screw with the camera's tripod socket,
    and then turn the attach/detach knob to tighten securely.
    (Fig. 4-2)
    Do not further push open the battery compartment
    cover when it is already open. Doing so may damage
    its hinge.
    Be sure to attach the battery grip to the camera before
    inserting the batteries. The results of the battery check
    may not be displayed properly if you attach the battery
    grip to the camera with the batteries already inside.
    Before removing the battery grip from the camera, be
    sure to turn the camera's power switch to <OFF>, and
    take out the batteries. After removing the batteries, attach
    the protective cover to the electrical contacts.
    1. After ipping out the release handle, turn it as shown by the
    arrow, and then pull out the battery magazine (for size-AA
    batteries). (Flg. 5)
    2. Insert one or two Battery Pack LP-E8 into the battery
    magazine for LP-E8 . (Fig. 6)
    3. Remove the protective cover of the battery magazine, and
    then attach it into the battery grip. (Flg. 7-1)
    After attaching, check that the battery magazine is securely
    attached to the battery grip.
    4. Close the release handle. (Fig. 7-2)
    If only one battery pack is used, it may be inserted in
    either the right or left side.
    If two battery packs are inserted, power is supplied
    simultaneously by both battery packs. Two battery packs
    with dierent charging levels can be inserted and used
    without any problems.
    Remove the battery packs or size-AA batteries from
    the battery grip when the camera will not be used for
    an extended period.
    1. Insert the batteries into the battery magazine
    (for size-AA batteries) (Fig.8) Make sure the + and - battery
    contacts are properly oriented as shown in the illustration.
    2. Attach the battery magazine into the battery grip. (Fig. 9-1)
    After attaching, check that the battery magazine is securely
    attached to the battery grip.
    3. Close the release handle. (Fig. 9-2)
    Fewer images can be shot when using size-AA batteries
    Also, the number of possible shots may vary depending
    on the batteries brand and storage conditions, so usage
    of size-AA batteries is recommended only for emergencies.
    With size-AA batteries, use six new batteries of the same
    brand at temperatures above 20°C/68°F. The camera may
    not function when used in low temperatures or when old
    and new batteries are used together.
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    PARTS NAME
    USING THE BATTERY GRIP
    Turning the vertical-grip operation switch to <ON> (Fig. 11)
    makes the battery grip buttons and dial function in the same
    way as those on the camera.
    When shooting in the horizontal-grip position, turn the vertical-
    grip operation switch to <OFF> so that you do not accidentally
    use the buttons or dial on the battery grip.
    Hand Strap (sold separately) can be used for enabling a
    more secure grip.
    The battery level can be checked on the camera.
    Battery: (1) One or two Battery Packs LP-E8
    (2) Six Size-AA Alkaline batteries
    (3)AC Adapter Kit
    Power switch: Cameras power switch
    Possible shots: Refer to your camera's Instruction Manual.
    Working temperature range: 0°C - +4O°C / 32°F - 104°F
    Working humidity: 85% or less
    Dimensions: 131.8 (W) x 108 (H) x 79.9 (D) mm/
    5.2 (W) x 4.3 (H) x 3.1 (D) in.
    Weight: Approx. 230 g/8.1 oz.
    (without batteries and
    battery magazine)
    USING A HOUSEHOLD POWER OUTLET
    To connect to a household power outlet, use the AC Adapter Kit
    (sold separately).
    1. Connect the power cord to the AC adapter, and insert the
    prongs into a power outlet. Connect the DC cord to the DC
    coupler.
    2. Insert the DC coupler into the release-handle-side battery pack
    compartment of the battery magazine (for LP-E8), and then
    attach to the battery grip. Pass the DC cord through the DC
    cord groove. (Fig. 10)
    Always set the cameras power switch to <OFF> before
    disconnecting the power cord.
    Be careful that the DC cord does not get pinched
    between the battery grip and the battery magazine.
    Canon
    designed for
    Item # XTCGT3i
Xit XTCGT3i

¿Necesita ayuda?

Número de preguntas: 0

¿Tiene alguna pregunta sobre Xit XTCGT3i o necesita ayuda? Haga su pregunta aquí. Proporcione una descripción clara y completa del problema y su pregunta. Cuantos más detalles proporcione para su problema y pregunta, más fácil será para otros propietarios de Xit XTCGT3i responder adecuadamente a su pregunta.

Vea el manual de Xit XTCGT3i aquí, de forma gratuita. Este manual pertenece a la categoría Otros accesorios de la cámara y ha sido calificado por 1 personas con un promedio de 9.1. Este manual está disponible en los siguientes idiomas: Engels. ¿Tiene alguna pregunta sobre Xit XTCGT3i o necesita ayuda? Haz tu pregunta aquí

Especificaciones de Xit XTCGT3i

General
Marca Xit
Modelo XTCGT3i
Producto Otro accesorio de la cámara
EAN 887575448853
Idioma Engels
Tipo de archivo PDF
Características
Marca compatible Canon
Productos compatibles EOS Rebel T2i/T3i/T4i/T5i
Interruptor de encendido/apagado integrado Si
Color del producto Negro
Contenido del embalaje
Manual de usuario Si
Batería
Tamaño de batería cilíndrica AA
Tipo de batería LP-E8
Numero de baterías soportadas 8

ManualPDF.es

¿Busca un manual? ManualPDF.es asegura que encontrará el manual que está buscando en un abrir y cerrar de ojos. Nuestra base de datos contiene más de 1 millón de manuales en PDF de más de 10.000 marcas. Cada día añadimos los últimos manuales para que siempre encuentres el producto que buscas. Es muy sencillo: simplemente escriba el nombre de la marca y el tipo de producto en la barra de búsqueda y podrá ver instantáneamente el manual de su elección en línea de forma gratuita.

ManualPDF.es

© Copyright 2021 ManualPDF.es. Todos los derechos reservados.

Utilizamos cookies para asegurar que damos la mejor experiencia al usuario en nuestro sitio web. Si continúa utilizando este sitio asumiremos que está de acuerdo.

Leer más